Banner
A good reinforced crankshaft that mounts to virtually any configuration for an unbeatable price.
Here is the new crankshaft AIRSAL Xtreme, this model has a normal race 39mm, it will be ideal to accompany your kits AIRSAL 70, 80 or 50cc, but also to accompany your other other brands kits. It is in full masses to offer more pre compression, the finish is very good.
Its red side cattails prove the quality and attention to balancing! To be well reinforced, it has a reinforced cast polished rod, placed on a Ø16mm crank pin and reinforced cages plus (Ø12X16X16mm for the rod feet), the big end cage is it treated money. The rod is obviously put on anti-friction wedges.
The bristles remain in Ø17mm, so you can place it with original size bearings. Steels used in the designs are obviously of the highest quality to deliver finish, reinforcement ... Clearly this crankshaft is really good although strengthened model, well finished, with a neat balancing! He'll know withstand even your high performance kits.
Specifications:
Course: 39,00mm (original)
Rod length: 85mm (origin)
Cage Ø12X16X16mm
Silks of Ø 17mm as the origin
Keying for ignition: yes
Balancing: yes and dynamics
Solid masses: yes
For engines: powerful and very powerful
Needle cage delivered: yes
Fits the 50cc motorcycles gearbox equipped minarelli am3, am4, am5, am6 euro 1 am6 euro 2:
Aprilia RS 50cc am6 from 1997 to 2006 (new attention after 2006 engine derbi euro 3)
Aprilia RX am6 engine (new attention after 2006 engine derbi euro 3)
Am6 APRILIA MX engine (new attention after 2006 engine derbi euro 3)
Aprilia Tuono 1997 am6 50cc engine 2006 (new attention after 2006 engine derbi euro 3)
BETA RR
BETA RR ALU
BETA CRE
HM HONDA
HONDA CRE
HONDA BAJA
HUSQUVARNA WXE
HUSQUVARNA CH
HM DERAPAGE
HM CRE
MALAGUTI DRAKON
MALAGUTI XTM
MALAGUTI XSM
FANTIC CABALLERO
PEUGEOT XP6
Peugeot XPS
MOTORHISPANIA RYZ
Peugeot XPS
PEUGEOT XP STREET
PEUGEOT XP STREET EVO
Peugeot XR6
MOTORHISPANIA RX
PEUGEOT XR7
MOTORHISPANIA RX-R
RIAJU RS1
RS2 RIEJU
RIEJU RS2 MATRIX
RIEJU RS2 MATRIX PRO
SMX RIEJU
RIEJU MRX
RIEJU SPIKE
KEEWAY TX EN
YAMAHA DT
MBK X-LIMIT
YAMAHA TZR
MBK X-POWER
SHERCO SM
SHERCO ENDURO
SHERCO HRD
SHERCO ENDURO
CPI SM
And many other machines!
Reference: 486138
A solid linkage in full masses, very reinforced and of excellent quality with a low price! Ideal to accompany an original configuration or slightly prepared on mécaboite Minarelli AM6 engine.
Reference: 451390
A very good crankshaft at low prices which will support 50cc kits like 80cc.
Reference: CIG-42
A reinforced version, full masses for minarelli am6 with bearings Ø20mm big litter.
Reference: CIG-22
A reinforced crankshaft sport for minarelli am6!
Reference: S410130320001
A good crankshaft reinforced and in full masses for your minarelli am6 with bearings of origin size.
Reference: 53401.14
From the top of the range race origin 39.00mm for mécaboite engine Minarelli AM6!
Reference: 075414
A very high quality crankshaft, in large bristles, full masses delivered with its bearings for am6 engine!
Reference: CB.44.8
A horse race between normal and long, wedge assembly without machining or on your small gain am6 and engine capacity (+ 1mm travel).
Reference: CIG-130R
A reinforced crankshaft for a solid low engine, ideal to accompany a prepared configuration!
Reference: CB.44.91R
The ULTIMATE vilo for am6, gorsses worn 20mm, celerons bearings, forged rod machined mass, excellent balancing, .... The best of the best !!!
Reference: CIG-78R
A reinforced crankshaft for a low engine sound, ideal to accompany a prepared configuration!
Reference: 419
A very good quality mid-range crankshaft designed to go up to 14,000 rpm!
Reference: 150838
The most performance crankshaft from ARTEK which can go up to 20,000 revolutions!
Reference: CIG-29
A reinforced version in solid masses for minarelli am6 with normal size bearings!
Reference: IM07062
An original crankshaft with bearings and spy perfectly adapted to be assembled together, reinforced model which will easily support an original type configuration up to the small 70cc kit.
Reference: 6030003
High quality crankshaft at low price for am6 engine.
A good reinforced crankshaft that mounts to virtually any configuration for an unbeatable price.
