Banner
Aluminum cooling radiator for MBK nitro and aerox or adaptation to other models.It is of course the same original, as good quality but much cheaper.
Tested and approved!!! So do not be fooled by the brand ... This radiator is manufactured by a good manufacturer of radiator, marketed by CGN it is normally intended for scooters NITRO & AEROX. This model in aluminum will be ideal for a proto adaptation because it extracts the heat very well, has a featherweight and is very compact. Delivered naked, it is quite fine.
It can therefore be installed on mob and various prototype. Its price is very correct and is placed under the big mark. It has 2 coolant inlets / outlets (X2 Ø15mm standard / X1 Ø7mm & X1 Ø12mm). 
Characteristics:
Fixings: 2 on each side, unthreaded Ø7mm with 110mm spacing on each side)
Panel size 195mm X 153mm X thickness 28mm
Total size 205 X 195 X thickness 28mm
Inlet and outlet: 2 Ø15mm for internal Ø 15mm hose 16mm / 1 Ø7mm for hose 7 to 8 mm and 1 Ø12mm for hose 12 to 13mm.
Reference: 478724
A radiator of very good quality less expensive than the origin. For PEUGEOT SPEEDFIGHT and other models It is of very good quality, identical to the original except for the price.
Reference: 483094
A good quality collar that allows you to tighten your clamps more tightly without risk of breakage.
Reference: 477400
TUN 'R hose radiator ideal for giving style to your water circuit while cooling it. 56mm long so easy to integrate!
Reference: 5516096
The water pump controller module! Ideal to adjust the temperature of your engine as you wish. Made in ITALY, high quality!
Reference: 518023
Original type aluminum cooling radiator for YAMAHA DT, MALAGUTI XSM, MBK X-LIMIT or adaptable to other models and prototypes.
Reference: 11028
A good quality necklace that can tighten your strongest clamping without risk of breakage.
Reference: 21 0868
A high-end collar that can tighten your tightening stronger without risk of breakage.
Reference: 11031
A high-end necklace that can tighten your strongest clamping without risk of breakage.
Reference: 519570
Transparent cooling hose internal diameter 19mm sold by 1m.
Reference: 143.330.003
Universal, light and solid POLINI expansion vase!
Reference: 2262
Transparent cooling hose inside diameter 12mm sold by 1.50m.
Reference: 483419
A one meter hose that can be used for many applications, reinforced model 3mm thick.
Reference: 519568
Transparent cooling hose internal diameter 9mm sold by 1m.
Reference: 133477
Transparent cooling hose internal diameter 20mm sold by 1m.
Reference: 144.230.003
POLINI hose with internal diameter of 18mm therefore ideal for ends from 17 to 20mm.
Reference: 11030
A good quality necklace that allows to squeeze harder without risk of breakage.
Aluminum cooling radiator for MBK nitro and aerox or adaptation to other models.It is of course the same original, as good quality but much cheaper.
