Reference: 56260.16
PARMAKIT segment d.46 X 1.5mm chrome ground for 70cc aluminum kit on Peugeot 103 / fox / wallaroo
Replacement hard chrome segment diameter 46mm, thickness 1.5mm for kit PEUGEOT 103, FOX, Honda Wallaroo...
Banner
Attention, not homologated and prohibited on the road, reserved only for competition.
Attention, for the PEUGEOT FOX and HONDA wallaroo which have a crankshaft with stroke and connecting rod very slightly different in size and no need for a decompressor, a special kit is now available, this model must not be installed which is intended for PEUGEOT 103 only .
A very good kit made in Italy, really very high-end and relatively solid, in high quality aluminum treated with nicasil, bore Ø46mm, 64.98 real, short piston in mono segment. It has 6 transfers, the side transfers to the joint plane are quite large. It is very similar to the famous malossi aluminum except that it is in a single segment 1.5mm thick, 46mm in diameter. The diagrams, the exhaust width, the finish... Make it a very powerful kit. The exhaust is normal without boosters or bars in order to preserve torque and solidity but it is all the same really very powerful also at high speed.
The turns are the most sought after on this type of kit, the piston has a rear preparation to open the rear transfers to ¾ in order to create a better flow of blayage to have the maximum torque, a kit may be known in France but to try , its performance is amazing. the rear transfers are enlarged in length so that the filling is better and to go with the piston preparation. For the finish, I will give a 7/10 rating.
The pack contains :
-an aluminum cylinder d.46mm 3 large transfers outside and 6 inside
-a mono segment piston with d.46mm
- a reinforced axle with anti-wear treatment, original diameter
-2 piston clips (axle ring) crab type
-1 segments reinforced end
- aluminum reinforced cylinder head gasket
-paper base gasket
- copper exhaust gasket
We recommend it with at least : racing exhaust, racing carburetion (17.5mm mini), reinforced bearings and crankshaft, crankcase preparation, cylinder head d.46mm.
Spare parts:
-Pack attached
As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement of the piston and the lower skirts is also included in this modification. Count a little extra time for this preparation!
Specific References
Reference: 56260.16
Replacement hard chrome segment diameter 46mm, thickness 1.5mm for kit PEUGEOT 103, FOX, Honda Wallaroo...
Reference: 56207.02A
The replacement piston for 46mm aluminum PARMAKIT air or liquid kits on 103, fox, wallaroo.
Reference: 56207.03
Pack seal for kit 70cc 46mm PARMAKIT AIR.
Reference: 56207.04
An excellent cylinder head, in addition to being rare it is very efficient and its cooling is really excellent!
Reference: 56209.00
The biggest kit on the market for 103, or should we say huge? A totally out-of-the-ordinary preparation base for experienced riders who know how to make the engines talk!
Reference: 31 8388
Very good kit level performance, torque and quality always at the rendezvous.
Reference: KT00073
Super strong and torquey, the only 70cc kit with the ATHENA which is very well suited to crankcases with 2 transfers!
Reference: 31 8393
high-end kit well worked with excellent finishes.
Reference: 01021846
A kit that is an excellent compromise between torque, power and durability. A price still defying all competition.
Reference: 56220.00
A highly anticipated watch, rare and well-structured cylinder! A nice base for those who don't like to do like everyone else.
Reference: 02022546
A kit at a low price and yet very efficient in addition to being a very good basis for preparation with its exhaust has boosters, its 6 transfers and its mono-segment (or bi-segment).
Reference: 56257.00
A superb cylinder, rare and well structured! A great base for those who don't like to be like everyone else.
Reference: CIL-962-S
Although relatively uncommon, this kit did nothing specific.
Reference: 31 8384
The well-known MALOSSI cast iron 70cc. Solid, torquey, not neglecting power, it is an ideal companion for long endurance trips where performance is required.
Reference: HM42
A kit at a low price and yet very efficient in addition to being a very good basis for preparation with its exhaust has boosters, its 6 transfers and its mono-segment (or bi-segment).
Reference: CI.26.650.G
Overpowered kit on the verge of extinction. Out of production!
Reference: 142.0089
Ideal for a small couple configuration! Original size transfers, solidity, simplicity, guaranteed performance POLINI !
Reference: 142.0100
W exhaust, liquid cooling, 6 intake transfers, mono-segment, chrome treated aluminum... What more could you ask for from a 103!
Reference: 003200
Out of production.
Reference: 002300
Super solid with its aluminum and its very high quality processing, its architecture also allows very good performance.