Reference: 1407
Carburettor DELLORTO PHVA 17,5 ED flexible, with separate lubrication, choke lever, vacuum ...
The 17.5mm version of the PHVA ED from DELLORTO, with vacuum outlet and separate lubrication, flexible mounting and choke lever!
Banner
Here is the Ø17.5mm carburetor from TUN 'R by YSN, PHVA type Red Edition model. This carb has a racing aesthetic has a separate lubrication and vacuum outlet but also 2 connections that you can link to the cylinder head on liquid-cooled engines so that the carburetor does not freeze in very cold weather, delivered with shutter therefore no obligation to use them!
Equipped with an automatic choke and its mounting is flexible for female intake pipe or flexible sleeve. This PHVA carburetor will be able to be mounted on your 103 / MBK 51 mopeds, mécaboites and scooter, it is up to you to adapt it properly (pipe, sleeve, fittings, ...) Its diameter for the air filter is 37mm (external measurement). This carburetor is certainly not DELLORTO quality but not TNT either ... Its finish is smooth and clean. Some complaints despite everything ... uncertified parts (jets, needle, ...).
Apart from that, we recommend it for those who use their 2 wheels every day. It has a multitude of adjustments: richness screw, idle jet, needle valve,… An excellent compromise between performance / aesthetics / low price! It is also important to know that all DELLORTO parts are mounted on this carburetor. Delivered as presented, complete.
Summary :
Starter: automatic
Possibility of vacuum valve: yes, delivered with shutter.
Separate lubrication: yes, delivered with shutter
Flexible mounting for sleeve or pipe Ø24mm anti-slip lip
Air filter fixing: unthreaded Ø37mm
Carburetor delivered with the following settings :
Main jet large step 95
Needle A12
40 ° cutting bushel
Idle jet size not listed
Choke jet size not listed
Reference: 1407
The 17.5mm version of the PHVA ED from DELLORTO, with vacuum outlet and separate lubrication, flexible mounting and choke lever!
Reference: 3067
The 17.5mm version of the DELLORTO PHBN LS, with socket for vacuum, antifreeze and separate greasing, flexible mounting, cable choke! Ideal on Booster Spirit, MBK Nitro ...
Reference: 492301
An excellent carburetor PHVA 17,5mm in a choke lever! Comes with adjustable nozzles and cable elbow.
Reference: 1012
Carburettor DELLORTO model PHVA ED 17.5, with outlet for depression and separate lubrication, flexible assembly, version without choke with a reduced price, for installation of electric choke!
Reference: 1210
A carburettor much better than a TNT which will make you consume little while filling your engine well.
Reference: 477383
A carburetor with a good quality racing look better than a TNT for a relatively low price.
Reference: 201.1702
An excellent high quality carburetor at a low price, with separate grease and vacuum sockets! Comes with adapter for filter Ø34 to 36mm.
Reference: 201.1705
The most powerful version of the 17.5 POLINI CP carburetor! Delivered with a venturi tulip!
Reference: 2585
The AD version of the PHBG in diameter 17.5mm. Rigid, with cable choke without separate greasing.
Reference: 466091
A good carburettor delivered with its automatic / electric choke
Reference: 2684
The DD version of the 17mm PHBG carburetor. Flexible, cable choke, large diameter inlet tulip and possibility of separate lubrication!
Reference: 478707
Good quality carburettor, ideal for increasing the performance of your 2 wheels! BLACK EDITION type model.
Reference: 468460
A carburetor much better than a TNT which will save you little fuel while filling your engine well.
Reference: 478708
A carburetor much better than a TNT racing look that will power your engine without spending too much money.
Reference: 1231
The 17.5mm version of the DELLORTO PHBN BT, with socket for depression, antifreeze and separate lubrication, flexible mounting, cable choke! Ideal on scooter as on motorcycle 50!
Reference: 201.1703
Ideal to accompany an original or prepared engine, CP POLINI 17.5mm version in rigid mounting.