You will most certainly be surprised to see the type KEIHIN PWK at home ... This is not too much the kind of home habit, however here the product is really good and had quite a place here.
We will obviously not tell you that this product is manufactured at KEIHIN and even less that it is identical to the real KEIHIN, like all copies it is made in Asian countries, but the quality is really present, unlike many copies , we will explain it to you and prove throughout the description and photos.
First of all, we were amazed at the finish brought to this piece, but also surprised by the quality of the aluminum or the screws. Whether it is machining / molding or assembly, the finish is really perfect.
The entry of the carburettor is well studied according to the phenomenon of venturi, this entry is machined in the rules of the art, it makes a diameter of 50mm. The body is machined very cleanly all along. The diameter of fixing pipe is Ø35mm (so ask with an inner Ø35mm sleeve or a flexible inner Ø35mm female pipe).
The bushel is chromed aluminum, very well finished pipe side so to speak perfect, a very slight lack of finish on the air filter side barely noticeable to the eye ... The input power jet is a real power jet with jet, it is therefore adjustable and very active. The jet can be easily changed by simply removing the cap under the tank!
To remove the tank, only 2 single Phillips screws. Below it is a single jet like Keihin hexagonal. All the inside of the carburetor is removable. The needle, the bushel and the sprinklers are really well studied, and the perfect finish ...
What more can be said! That it is an excellent carburettor, very well studied, which is even better finished than many branded carburetors ... With its diameter of 28mm, its presets, its power jet and its flat bushel it will be suitable for engines very equipped especially those who have a barrel escapement cylinder.
For the main sprinklers we recommend POLINI . As and when, spare parts and adjustments will come to the site.