Carburetor 21.5 mm PHBG FURYTECH rigid, without separate greasing, choke with cable

If you want to preserve low consumption while having more performance than with a SHA model or other for endurance or the road for example. Without spending as much as a DELLORTO but having a quality and finish all the same present. Then FURYTECH does it for you with the PHBG model. This low-cost carburetor is of very high quality and has a multitude of adjustments: richness screw, idle jet, needle valve ...

It is rigidly mounted with a cable choke, you can also switch it to a lever choke without difficulty. Compared to the SHA carburettor, this model is much more precise, efficient in recovery, acceleration and peak speed. This model does not have separate lubrication. Also with this black color that gives it a really racing look.

Advice : accompany it with a 21 or 19mm pipe, carbon valve slats, pipe as much as possible aligned with the valves, you can simply use an original air filter but also a horn. Provide a range of jets from 86 to 120 depending on the filter used.

The carburetor is delivered as such:

Main jet small standard pitch: 108