Reference: 481763
CGN variator nut for Peugeot 103 sp, mv, mvl, lm, vogue ... (MBK 51 ignition)
Ideal in case of loss or replacement of a worn nut! Can also be mounted on crankshafts not to the right of MBK 51, ignition side.
Banner
Here is the DOPPLER needle cage, it is a really specific product and quite unusual indeed DOPPLER is the only manufacturer to still offer needle cages with specific clearances for MBK 51. This cage is very high quality, ultra reinforced and with improved lubrication. Size like the origin and all other models Ø13 X Ø16 X L.14mm.
The Clearance must be selected according to the forcing on the piston pin but also according to the engine speed! Generally, with the example of a crankshaft bearing, we will take a cage with very little play for an engine which takes low revs because it does not require big freedom! However, on a very high speed engine, if the cage has very little play, at very high speed it risks entering into seizure / overheating phenomenon and risks yielding in addition to slightly restricting the engine speed.
-Game from 0 to - 2 (low and medium engine generally 0 to 9,500 rpm max)
-Game from - 2 to - 4 (high speed generally 9500 to 14,000 rpm max)
Remember to select the desired game before adding it to the cart.
Reference: 481763
Ideal in case of loss or replacement of a worn nut! Can also be mounted on crankshafts not to the right of MBK 51, ignition side.
Reference: 7964
High-end bearing with steel cage. Can support any configuration without problem.
Reference: 36687
Premium pack that can withstand any big setup.
Reference: 541050O
A very practical tool to remove the bearings more easily from your crankshaft or other.
Reference: 4121
A reinforced needle cage with improved lubrication which will therefore be able to support very large kits without spending a lot of time.
Reference: 505184
Set of two bearings + oil seals for low engine MBK 51 / AV10 / AV7
Reference: 285.0110
High-end spinnaker seals for MBK 51.
Reference: 4763
Ideal in case of breakage or wear for a good quality and safe reassembly.
Reference: 502028
Hexagonal ignition nut ideal in case of breakage or wear for a good quality and safe reassembly.
Reference: 480974
Excellent in case of wear of your old nut.
Reference: 12200213
Ideal to accompany a prepared engine! Spare pack for housings / crankshaft BIDALOT G1, G2 OPEN.
Reference: rrd_cage_51
High performance RRD needle cage for your moped.
Reference: RST.325
Reinforced model and of very high quality, ideal to avoid any breakage or seizing of your crankshaft.
Reference: 5068
A handy tool to remove most of your crankshaft bearings facilements or another.
Reference: 19 1910B
To have a variator that slides as well as possible.