Cable clamps / tensioners, adjusters for accelerator, choke, brake ... for motor bike 50 with 125cc
-
Adjuster / barrel cable tensioner Ø6 X 100mm aluminum thread for motorbike and other (free brake nut)
Often of poor quality or worn by tightening .... Light and resistant aluminum model!
-
Aluminum M8 thread cable adjuster / barrel for motorbike and other (free brake nut)
Light and resistant aluminum model!
-
-
-
Cable clamp screw Ø8mm X L.1,3cm ALGI for decompressors, choke, brake ... (screw head outgoing side)
Reinforced cable clamp Ø8mm X L.1,3cm for cable diameter Ø3,5mm.
-
Cable clamp Ø4mm X L.8mm ALGI for throttle grip, accelerator or others (outgoing head screw)
Reinforced cable clamp Ø4mm X L.8mm for Ø1,6mm diameter cable.
-
Cable clamp Ø5,2mm X L.8mm ALGI for throttle grip, accelerator or others (screw outgoing head)
Reinforced cable clamp Ø5,2mm X L.8mm for cable diameter Ø2,2mm.
-
Cable clamp Ø5,5mm X L.6mm ALGI Magura for accelerator or others (screws inbound head)
Reinforced cable clamp Ø5,5mm X L.6mm for Ø1,8mm diameter cable.
-
Cable clamp Ø6mm X L.1,3cm ALGI for MBK gas handle, front brake MBK or others (outgoing head screw)
Reinforced cable clamp Ø6mm X L.1,3cm for Ø2,2mm diameter cable.
-
Cable kit + cable clamps, CGN barrel for moped or others
An ultra complete kit ideal for refurbishing your accelerator, clutch.
-
Cable tensioner / barrel M7 thread for motorbike and other (free brake nut)
Ideal for refurbishing your cockpit, at low prices!
-
Clamp screw Ø4mm TNT for decompression, starter & Accelerator (incoming head screws)
A cable clamp screw, reinforced brass model that will allow a good grip of your cable.
-
-
-
Clamp screw Ø5,5 X L.9mm MALOSSI for relief cock, choke and throttle (screw outgoing head)
Serre cable MALOSSI Ø5.5 x 9mm. Ideal for secure attachment.
-
Clamp screw Ø6mm CGN rear brake moped or other uses (outgoing head screws)
Cable clamp Ø6mm X strengthened L.14mm (screw tightened) to diameter cable Ø2,6mm.
-
Clamp screw Ø6mm X L.1cm ALGI to handle Peugeot gas, accelerator or others (outgoing head screws)
Reinforced Clamp Ø6mm X L.1cm for cable diameter Ø2,5mm.
-
Regulator / cable tensioner barrel Ø6mm thread / end piece for Ø6mm sheath for motorbikes and others (free locking nut)
Good quality, Ø6mm thread for Ø6mm sheath end.
-
Screw clamp Ø5mm X L.7,8mm ALGI Magura for accelerator or others (screws inbound head)
Reinforced cable clamp Ø5mm X L.7,8mm for cable diameter Ø2mm.
-
Screw clamp Ø6mm X L.1cm ALGI for Peugeot throttle, accelerator or others (screw outgoing head)
Reinforced cable clamp Ø6mm X L.1cm for cable diameter Ø2,5mm.
-
Screw clamp Ø7mm ALGI for rear brake mopeds or other uses (screw outgoing head)
Reinforced cable clamp Ø7mm X L.1,7cm (tight screw) for Ø2,6mm diameter cable.
-
Screw clamp Ø7mm X L.1,6cm ALGI for drum brake or other applications (screw outgoing head)
Reinforced cable clamp Ø7mm X L.1,6cm for cable diameter Ø2,2mm.
-
Screw clamp Ø7mm X L.10mm ALGI for PEUGEOT decompressors, brake AR, MBK ... (screw head outgoing side)
Reinforced cable clamp Ø7mm X L.10mm for cable diameter Ø2,5mm.
-
Screw clamps Ø6mm X L.10mm ALGI for PEUGEOT decompressors, brake AR, MBK ... (right outgoing head screw)
Reinforced cable clamp Ø6mm X L.10mm for cable diameter Ø2,5mm.
-
Trimmer / cable adjuster barrel thread Ø10 X 125mm aluminum for bike and other (free brake nut)
Often of poor quality or worn by tightening .... Lightweight aluminum model and strong!
-
Trimmer / cable adjuster barrel thread Ø5mm / end for Ø6mm sheath for motor bike and other (free brake nut)
Piece quality machined aluminum Ø5mm thread sheath tip Ø6mm.
-
Trimmer / cable adjuster barrel thread Ø6mm / tip for Ø7mm sheath for bike and other (free brake nut)
Standard quality original thread for Ø6mm sheath tip Ø7mm.
-
Trimmer / cable adjuster barrel thread Ø7mm / end for Ø6mm sheath for motor bike and other (free brake nut)
Standard quality original Ø7mm thread sheath tip Ø6mm.
-
Trimmer / cable adjuster barrel thread Ø7mm / tip for Ø9mm sheath for bike and other (free brake nut)
High quality piece Ø7mm thread sheath tip Ø9mm.
-
Trimmer / cable adjuster barrel thread Ø8mm / sheath tip for Ø8mm to bike and other (free brake nut)
Competition piece machined in the mass Ø8mm threading for sheath tip Ø8mm.
Search
Cart
Categories
-
Moto 50cc gearbox, mécaboite ... AM6, DERBI, TZR, XP6 ...
-
Moped, motorcycle, 103, 51, CIAO, ...
-
Scooter / Maxiscooter 50 to 125cc + 2 and 4 stroke
-
Moto 50cc to 125cc 2T & 4T and more
-
80cc MOTORCYCLE
-
Aesthetics and chassis for motor bike 50 with 125cc
-
Expedients product, cleaners, grease, paint ... for motor bike 50 with 125cc
-
Tools and electrical accessories (clips, terminals, fuses, switches, circuit breaker ...) for 50 to 125cc motorcycle
-
Batteries, acid, chargers ... for motor bike 50 with 125cc
-
Counters, rev counters, dashboard, sensors ... for motor bike 50 with 125cc
- Neon lights, plate lights, daytime running lights, LED, diode, tuning ... for motor bike 50 with 125cc
-
front lights, head of fork, headlight bulbs ... for motor bike 50 with 125cc
-
Rear lights, headlight, cabochons, bulbs ... for motor bike 50 with 125cc
-
Indicators / fires with intermissions, bulbs ... for motor bike 50 with 125cc
-
Handlebar, levers, fast pulling, protect hand, foam, retro, trigger guards ... motor bike 50 with 125cc
- throttle cable, choke ... for motor bike 50 with 125cc
- Cable clamps / tensioners, adjusters for accelerator, choke, brake ... for motor bike 50 with 125cc
- protective sleeve for cable, tuning & origin motorcycle 125cc 50
- Mirrors, retro, adapters, fixings ... for motor bike 50 with 125cc
- Handles, coatings of handlebar for motor bike 50 with 125cc
- quick draw, throttle grip, accessories ... for motor bike 50 with 125cc
- Kits of complete levers with fast pulling for motor bike 50 with 125cc
- brake and clutch levers for motor bike 50 with 125cc
- choke levers, handlebar stalk and accessories for motor bike 50 with 125cc
- Handlebar cross, sport, tuning ... for motor bike 50 with 125cc
- bar ends for motorcycle 125cc 50
- Petrol hands for motor bike 50 with 125cc
- Pontets handlebars, handlebar mount for motorcycle 125cc 50
- Handlebar foam motorcycle 125cc 50
- Fairings, fenders, fairings kit ... for motor bike 50 with 125cc
- Carter, protects chain ... for motor bike 50 with 125cc
- Screws, washers, bolts, tuning, anodized, mounting bracket ... for motor bike 50 with 125cc
- Chain locks, alarms, block disc ... for motor bike 50 with 125cc
-
Kits chains, sprockets, chains only, quick couplers ... 50 motorcycle 125cc
- Depreciation, steering damper ... for motor bike 50 with 125cc
-
Brake discs, pads, flexible, fluid hose, bracket ... for motor bike 50 with 125cc
-
Pneumatic valves, tube, shaft, wheel bearing ... for motor bike 50 with 125cc
-
Stickers, stickers, grids, decorations ... for motor bike 50 with 125cc
- Crutches and raise your bike to bike 50 with 125cc
-
Forks, oil, seals, accessories, bearings ... for motor bike 70, 80cc ...
-
-
motorcycle engine over 80cc has 125cc 2 times (YAMAHA, HONDA ...)
-
-
125cc MOTO
-
MOTO 150, 250, 450 ...
-
-
Pocket bike, pocket quad, mini bike, mini quad
-
Oils, products and expedients
-
Tools, products and accessories of the mechanic preparer
-
Equipment driver / mechanic (jacket, blue, gloves, jacket, cap, helmet ...)
- Goodies, commercial accessories, pencils, carries key ...
-
Motocross, enduro, trial 50cc to 500cc 2 and 4 stroke
-
Large displacement motorcycle DUCATI, HONDA, KAWASAKI, SUZUKI, YAMAHA ...
- Parts 50cc occasions mécaboite, moped, scooter, ...
-
Karting
-
Buggy and ATV
- ULM, planeur motorisé...
Pay with credit card
|
|
|
|
|
Original design by Radius design modified by
By ChapodepaY |
||