Reference: 483094
CGN clamp for hose L. 9mm d.25 to 40mm hoses, pipe...
A good quality collar that allows you to tighten your clamps more tightly without risk of breakage.
Banner
Ideal in case of breakage of your original calorstat or if you do not have one (removed by the mechanic or former owner) and you want to put one back. This TEKNIX calorstat is of good quality. On large configurations, it should generally be removed to facilitate the passage of the liquid. But winter is strongly discouraged.
The motorcycle will not heat up properly and wear may occur faster than expected! The calorstat function works like this: it closes the inlet as long as the liquid is not hot in the engine… It opens as soon as it is at the right temperature. This allows the engine to be at the right temperature and avoids having to heat the motorcycle too long.Generally, some do not recommend leaving it because it can cause problems (seizure due to wear). We recommend to leave the calorstat (except on very large configuration and again…) but to change it every 1 year or even 2 years! As the mechanical booklets advise.
Mounts on:
All mécaboites 50cc with DERBI Euro 1, 2, 3 and 4 engine
Reference: 483094
A good quality collar that allows you to tighten your clamps more tightly without risk of breakage.
Reference: 11033
A good quality collar which allows you to tighten your tightenings more securely without risk of breakage.
Reference: 21 0870B
A high-end necklace that allows to squeeze harder without risk of breakage.
Reference: 11031
A high-end necklace that can tighten your strongest clamping without risk of breakage.
Reference: 501200
An excellent top-of-the-range refrigerant and anti-corrosion coolant withstands down to -40 ° C.
Reference: 460082
A complete kit to refurbish your engines in engines DERBI euro 1 and 2.
Reference: 477400
TUN 'R hose radiator ideal for giving style to your water circuit while cooling it. 56mm long so easy to integrate!
Reference: 1012877
Ideal for plugging carburettor air intakes or cylinder head.
Reference: 875068
Excellent output (20W, 1200L/H), the best pump on the market! A high quality water pump that works from 9V up to 15V! Ø of pipes 20mm.
Reference: 11027
Good quality necklace that can tighten your strongest clamping without risk of breakage.
Reference: 11034
A good quality collar which allows you to tighten your tightenings more securely without risk of breakage.
Reference: 093600A
Universal water pump, ideal for improving the cooling circuit.
Reference: 584715
DERBI original temperature probe, Ø14 thread.
Reference: 21 0866
A high-end collar that can tighten your tightening stronger without risk of breakage.
Reference: 11029
A good quality necklace that can tighten your tightening stronger without risk of breakage.
Reference: 5514779B
Replacement cable for the universal water pump MALOSSI ENERGY PUMP.