Reference: RST.179
ITALKIT COMPETITION needle cage reinforced Ø14X18X18mm
A special competition needle cage, silver treated from ITALKIT in Ø14X18X18mm.
Banner
PARMAKIT reinforced crankshaft, cut in best steels and well assembled, the crankshaft has a 54mm long stroke to increase engine displacement, torque and power, 105mm long by connecting rod to reduce the sustained pressure and stress on the piston and connecting rod by reducing the working angle, you must use an 8mm shim under the cylinder if it is not suitable has a long rod of 105mm and 1.5mm and more if it is not suitable has a long 54mm stroke. In addition, the diameter of the mass is increased to 87mm for a better engine inertia, but also, the increase (also Appellees bristles) are Ø 20mm, it faudrat you use the appropriate bearings to seat diameter 20mm! Ideal with a motor home or a large kit! Good balance! Admission to a Model valves!
Itself on:
-VESPA 125cc ET3
-VESPA 125cc ETS
-VESPA 125cc PK
-VESPA 125cc PRIMAVERA
-VESPA 125cc XL
Reference: RST.179
A special competition needle cage, silver treated from ITALKIT in Ø14X18X18mm.
Reference: 57006.14
Good quality reinforced crankshaft, ideal to put her down engine and accompany a new kit! Cone 19mm.
Reference: 6030082
Good quality reinforced crankshaft, ideal to put her down engine and accompany a new kit!
Reference: RST.341
A special competition needle cage, silver treated from ITALKIT in Ø14X19X17mm.
Reference: 6030081
Good quality reinforced crankshaft, ideal to put her down engine and accompany a new kit!
Reference: 210.0034
The famous long race 52,8mm POLINI EVOLUTION with its solid masses, its bristles of 20mm and its machined rod! The best of the best! For admission to flaps only!
Reference: IM07067
Crankshaft of good quality reinforced, ideal to put his low engine to nine and accompany a kit!
Reference: 6030156
Good quality reinforced crankshaft, ideal to put her down engine and accompany a new kit!
Reference: RST.256
The ITALKIT reinforced "SPORT" cage for ROTAX 125cc motorcycle and karting engines.
Reference: 210.0070
The famous long stroke 54mm POLINI EVOLUTION with its solid masses, its 20mm bristles and its machined connecting rod! The top of the top! For intake valves only!
Reference: 57417.14
Good quality reinforced crankshaft and connecting rod 110mm long race 60mm long, ideal to put her down engine and accompany a new kit!
Reference: 57040.14
Crankshaft long race 54mm, 87mm diameter big masses for more inertia, Ø litters Ø20mm! For admission valves! Rod longwall original 97mm!
Reference: 57008.14
Crankshaft normal race 87mm diameter for large masses more inertia, Ø litters Ø19 or Ø20mm to choice! For admission valves!
Reference: 57080.14
W FORCE crankshaft normal race 87mm diameter for large masses more inertia, Ø 20mm scopes!
Reference: JA6038024
Reinforced crankshaft for 125/150 / 180cc 2T scooter engines PIAGGIO / GILERA / APRILIA ...
Reference: 280.0058
Reinforced needle cage POLINI for VESPA P200E.