Reference: 213.0013
RACING valves for POLINI MBK 51 / PEUGEOT 103 casings Built-in support
RACING valves with diffuser, mono-slats for housings POLINI 103, 51, MINICROSS POLINI , APE...
Banner
Here are the VL8 MALOSSI valves, identical to the VL7 but vulcanized, so they are much more upscale, it allows superb sealing and less pronounced wear of the slats. This valve box is basic machined aluminum and then covered with a specific viton rubber. The lamella stop screws are also better than the VL7 box, here it is a real thread in aluminum with allen screws.
This box being vulcanized, it is self-sealing and does not require additional seals. It is ideal for improving the quality and performance on MALOSSI valve boxes of Peugeot 103 and MBK 51, or as a replacement (replacement) for MALOSSI valve boxes on PIAGGIO CIAO.
Available in carbon or karbonit (special fiberglass) strips, to be selected before purchase.
Reference: 213.0013
RACING valves with diffuser, mono-slats for housings POLINI 103, 51, MINICROSS POLINI , APE...
Reference: 247751
A well worked room for a considerable performance boost on your MBK.
Reference: 213.0526
High quality carbon slats. Set of 0.30 and play of 0.35mm.
Reference: 13700213
Competition valves for BIDALOT G1/G2 casings on MBK 51.
Reference: 27 7366.K0
Two 100X100mm boards in Karbonit MALOSSI available in 0.30, 0.35 and 0.40mm. It can be cut and therefore adapts to all 2-stroke motor vehicles. Choice of thickness.
Reference: 213.0020
Valves for POLINI, DR RACING, ATHENA ...
Reference: CAL01RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on MOTOBECANE AV10 / MBK 51 engine with POLINI housings.
Reference: 27 5618.C0
An excellent game slide for fine adjustments!
Reference: 213.0599
Planks for manufacturing POLINI carbon valve slats, certified high quality! Available in 0.25, 0.28, 0.30, 0.33, 0.35, 0.40 and 0.45mm. For all 2-stroke engines, choice of thickness!
Reference: 27 3021.C0
The famous LV2 carbon version for your AV10 engine MBK 51, MOTOBECANE!
Reference: 13800213
The intake pipe pack + valves G1 / G2 BIDALOT!
Reference: 27 7366.C0
MALOSSI Carbon Cutting Boards available in 0.30, 0.35 and 0.40mm. Top of the line. For manufacturing slats on a 2-stroke engine, thicknesses to choose from!
Reference: 27 5610.K0
The best to have the quality KARBONIT MALOSSI fiberglass at the correct price, and especially to choose the appropriate thickness for the maximum performance of its engine, is mounted on PIAGGIO CIAO with MALOSSI and PEUGEOT 103 or MBK 51 casings with complete valve box MALOSSI.
Reference: 27 3407.C0
The MALOSSI valves has special specific inclination for the G2 casings of the same brand on MBK 51! Can also be mounted on old motorcycles 80cc 2T YAMAHA and HONDA!
Reference: 144.405.003
HYPER RACING valves with diffuser, bonded, single-leaf for POLINI 103, 51, MINICROSS POLINI, APE ...
Reference: 213.0032
Spare valves for POLINI casings with incorporated support of PEUGEOT 103 and MBK 51.