Reference: 638
CGN valve seal for original casings on Peugeot 103
An original type gasket for original crankcases at low prices.
Banner
Here are the valves DOPPLER ER3 for Peugeot 103, these valves are improved in relation to the origin, especially at the level of the slats which is thicker (0.35mm) and which allows you to achieve better power regimes (it enters in resonance frequency later). These valves are also enlarged at the intake inlet, the blade is passed in mono and is carbon fiber of very high quality.
They have an aluminum base, the slat change is simple, disassembly via 2 Phillips screws. We will regret that they are not plasticized or vulcanized and that the slat stop is not drilled to avoid mas gas! We will all the same preference for polini also mounted in mono at the stop lamelle, or even better the MALOSSI which are in mono and have a stop lamelle studied, a reclined inclination and a plastic material allowing to damp the closure ...
Reference: 638
An original type gasket for original crankcases at low prices.
Reference: 27 7366.K0
Two 100X100mm boards in Karbonit MALOSSI available in 0.30, 0.35 and 0.40mm. It can be cut and therefore adapts to all 2-stroke motor vehicles. Choice of thickness.
Reference: 635
With its steel slats clicking, original type, good quality!
Reference: 215.0301
The famous POLINI valve box greatly improves the admission, ideal accompanied by a PHBG carburetor in 17 to 21mm rigid!
Reference: 213.0032
Spare valves for POLINI casings with incorporated support of PEUGEOT 103 and MBK 51.
Reference: 27 2643.K0
The luxury version of the VL7, an aluminum base, vulcanized ...
Reference: 213.0020
Valves for POLINI, DR RACING, ATHENA ...
Reference: 215.0300
Enough to improve as it should the admission of your 103, ideal accompanied by a 15 or 16mm SHA carburetor!
Reference: 2718510
The best way to get MALOSSI carbon quality at the right price, and above all to choose the appropriate thickness for the maximum performance of your engine, is mounted on a VL18 valve box!
Reference: 2715810.C0
The famous MHR Vl18 valves! Guaranteed performance!
Reference: 27 4235.K0
Valves that are suitable for both small and large configurations.
Reference: 144.405.003
HYPER RACING valves with diffuser, bonded, single-leaf for POLINI 103, 51, MINICROSS POLINI, APE ...
Reference: 20 5039
Ideal for gaining performance, especially with large kits!
Reference: 27 5616.K0
Ideal for selecting the right slat thickness for your machine, made of high-end KARBONIT MALOSSI fiberglass.
Reference: 27 5614.K0
A set of KARBONIT slats, very nice to adjust your machine to the thickness of the valve slats by taking advantage of a good quality of KARBONIT fiber for a nicer cost than carbon.
Reference: 27 5610.K0
The best to have the quality KARBONIT MALOSSI fiberglass at the correct price, and especially to choose the appropriate thickness for the maximum performance of its engine, is mounted on PIAGGIO CIAO with MALOSSI and PEUGEOT 103 or MBK 51 casings with complete valve box MALOSSI.
Reference: CAL02RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on PEUGEOT 103 engine with POLINI housings, with built-in brackets.