Reference: 638
CGN valve seal for original casings on Peugeot 103
An original type gasket for original crankcases at low prices.
Banner
Here are the valves DOPPLER ER3 for Peugeot 103, these valves are improved in relation to the origin, especially at the level of the slats which is thicker (0.35mm) and which allows you to achieve better power regimes (it enters in resonance frequency later). These valves are also enlarged at the intake inlet, the blade is passed in mono and is carbon fiber of very high quality.
They have an aluminum base, the slat change is simple, disassembly via 2 Phillips screws. We will regret that they are not plasticized or vulcanized and that the slat stop is not drilled to avoid mas gas! We will all the same preference for polini also mounted in mono at the stop lamelle, or even better the MALOSSI which are in mono and have a stop lamelle studied, a reclined inclination and a plastic material allowing to damp the closure ...
Reference: 638
An original type gasket for original crankcases at low prices.
Reference: 27 5610.K0
The best to have the quality KARBONIT MALOSSI fiberglass at the correct price, and especially to choose the appropriate thickness for the maximum performance of its engine, is mounted on PIAGGIO CIAO with MALOSSI and PEUGEOT 103 or MBK 51 casings with complete valve box MALOSSI.
Reference: 27 2356.K0
Racing valves with a very studied base passed in single-leaf, available in karbonit or carbon!
Reference: 507028
Ideal for gaining performance and solidity at the slightest hit.
Reference: 20 6856
Ideal for increasing performance, especially with a large kit, a pack that includes everything needed between the carburettor and the crankcases. Have
Reference: 213.0032
Spare valves for POLINI casings with incorporated support of PEUGEOT 103 and MBK 51.
Reference: 526206
The famous complete valve box at a low price, delivered with its pipes for SHA and PHBG carburetors!
Reference: 2715810.C0
The famous MHR Vl18 valves! Guaranteed performance!
Reference: 213.0017
Delivered with pipe and valve seal, carbon single-blade with refined stops ... The top for 103!
Reference: 27 2643.K0
The luxury version of the VL7, an aluminum base, vulcanized ...
Reference: 002312
The only vulcanized valves on the market for PEUGEOT 103, with the added advantage of fiberglass slats!
Reference: 215.0300
Enough to improve as it should the admission of your 103, ideal accompanied by a 15 or 16mm SHA carburetor!
Reference: 27 5614.K0
A set of KARBONIT slats, very nice to adjust your machine to the thickness of the valve slats by taking advantage of a good quality of KARBONIT fiber for a nicer cost than carbon.
Reference: 144.405.003
HYPER RACING valves with diffuser, bonded, single-leaf for POLINI 103, 51, MINICROSS POLINI, APE ...
Reference: 20 6138
Ideal to put a carburetor DELLORTO 21 PHBG on your PEUGEOT XP using a system of real valves!
Reference: 213.0020
Valves for POLINI, DR RACING, ATHENA ...
Reference: 215.0301
The famous POLINI valve box greatly improves the admission, ideal accompanied by a PHBG carburetor in 17 to 21mm rigid!