Reference: 213.0013
RACING valves for POLINI MBK 51 / PEUGEOT 103 casings Built-in support
RACING valves with diffuser, mono-slats for housings POLINI 103, 51, MINICROSS POLINI , APE...
Banner
Here are the CGN valves for Peugeot 103, these valves are improved in relation to the origin, especially at the level of the slats which is thicker (0.35mm) and which therefore allows you to reach better power regimes (it comes in resonant frequency later).
They have a softer rigid plastic base for the coverslip, changing the coverslip is simple, disassembly via 2 Phillips screws.
Mounts on PEUGEOT 103 MVL, VOGUE, SP, SPX, RCX, TOMOS ...
Reference: 213.0013
RACING valves with diffuser, mono-slats for housings POLINI 103, 51, MINICROSS POLINI , APE...
Reference: 27 5616.C0
A specific high-end set for your VL1 valves! Set your machine to perfection by choosing the best thickness and choosing noble materials for your slats!
Reference: 144.405.003
HYPER RACING valves with diffuser, bonded, single-leaf for POLINI 103, 51, MINICROSS POLINI, APE ...
Reference: 27 2643.K0
The luxury version of the VL7, an aluminum base, vulcanized ...
Reference: 27 7366.C0
MALOSSI Carbon Cutting Boards available in 0.30, 0.35 and 0.40mm. Top of the line. For manufacturing slats on a 2-stroke engine, thicknesses to choose from!
Reference: 2714152.C0
Much improved version of MALOSSI VL15!
Reference: 213.0032
Spare valves for POLINI casings with incorporated support of PEUGEOT 103 and MBK 51.
Reference: 20 6856
Ideal for increasing performance, especially with a large kit, a pack that includes everything needed between the carburettor and the crankcases. Have
Reference: 27 5610.K0
The best to have the quality KARBONIT MALOSSI fiberglass at the correct price, and especially to choose the appropriate thickness for the maximum performance of its engine, is mounted on PIAGGIO CIAO with MALOSSI and PEUGEOT 103 or MBK 51 casings with complete valve box MALOSSI.
Reference: 526206
The famous complete valve box at a low price, delivered with its pipes for SHA and PHBG carburetors!
Reference: 27 5614.K0
A set of KARBONIT slats, very nice to adjust your machine to the thickness of the valve slats by taking advantage of a good quality of KARBONIT fiber for a nicer cost than carbon.
Reference: 247766
Valves mounted in mono-lamelle fiberglass for your 103.
Reference: 20 6138
Ideal to put a carburetor DELLORTO 21 PHBG on your PEUGEOT XP using a system of real valves!
Reference: 2718510
The best way to get MALOSSI carbon quality at the right price, and above all to choose the appropriate thickness for the maximum performance of your engine, is mounted on a VL18 valve box!
Reference: 365117
Valves mounted in mono-slat carbon 0.35mm for your 103!
Reference: 20 5039
Ideal for gaining performance, especially with large kits!