Reference: 27 5616.K0
Set of 2 slats MALOSSI KARBONIT 0.30 & 0.35mm for VL1 Peugeot 103 valves
Ideal for selecting the right slat thickness for your machine, made of high-end KARBONIT MALOSSI fiberglass.
Banner
The Malossi competition valve box allows the gas supply to be greatly promoted, especially on Peugeot 103 where the original intake is really not very good. It consists of an extra short rigid pipe, a large volume aluminum box to pass the large valves, and finally competition valves 4 slats karbonit 0.30mm VL7.
It will therefore allow you in combination with a crankcase preparation to have a good big admission without too much loss of pre - compression. This model is specific for the Peugeot 103 SPX, RCX, MVX and CLIP. You can mount it with original casings, BIDALOT, ATHENA, EUROCILINDRO, PARMAKIT, TNT, AXWIN... For carburetors over 19mm we recommend removing the slat stops. Nothing prevents you from mounting it with a flexible sleeve special rigid pipe and a flexible carburettor. This piece is really more elaborate than its competitor the POLINI.
These kits have been made to increase the power of the engines on which a sports transformation is applied for the competition. A cutting of the original engine support is mandatory to pass this box.
GUARANTEES : The components of the kit are guaranteed to be free from manufacturing defects.
Defective parts can be returned to us (free shipping) only if we give authorization.
The pack includes :
Pipe in 15 or 21mm
Complete gasket set
Lengthening aluminum box
Valves 4 blades karbonit 0.30mm VL7
Notice
Spare parts :
Pipe d.21mm/15mm
Seal bag
Valves vl7
Valve slats vl7
Select the valve box in 15 or 21mm before purchase.
-On the d.15mm you can mount the 14.15 and 16mm dellorto SHA model carburettors. Carburettor mounting diameter: 19mm pipe internal diameter: 15mm
-On the d.21mm you can put the 19,20,21 and 22mm dellorto PHBG model carburettors. Carburettor mounting diameter: 24mm pipe internal diameter: 19mm
Reference: 27 5616.K0
Ideal for selecting the right slat thickness for your machine, made of high-end KARBONIT MALOSSI fiberglass.
Reference: 213.0524
Ideal for improving your performance.
Reference: 635
With its steel slats clicking, original type, good quality!
Reference: 27 7366.K0
Two 100X100mm boards in Karbonit MALOSSI available in 0.30, 0.35 and 0.40mm. It can be cut and therefore adapts to all 2-stroke motor vehicles. Choice of thickness.
Reference: 2714152.C0
Much improved version of MALOSSI VL15!
Reference: 20 5039
Ideal for gaining performance, especially with large kits!
Reference: 365117
Valves mounted in mono-slat carbon 0.35mm for your 103!
Reference: 215.0300
Enough to improve as it should the admission of your 103, ideal accompanied by a 15 or 16mm SHA carburetor!
Reference: 213.0599
Planks for manufacturing POLINI carbon valve slats, certified high quality! Available in 0.25, 0.28, 0.30, 0.33, 0.35, 0.40 and 0.45mm. For all 2-stroke engines, choice of thickness!
Reference: 507028
Ideal for gaining performance and solidity at the slightest hit.
Reference: 2718510
The best way to get MALOSSI carbon quality at the right price, and above all to choose the appropriate thickness for the maximum performance of your engine, is mounted on a VL18 valve box!
Reference: 27 5034.K0
What to repair your complete MALOSSI valve box on PEUGEOT 103, MBK 51 ... By having in addition the KARBONIT or CARBON option.
Reference: 27 5616.C0
A specific high-end set for your VL1 valves! Set your machine to perfection by choosing the best thickness and choosing noble materials for your slats!
Reference: 526206
The famous complete valve box at a low price, delivered with its pipes for SHA and PHBG carburetors!
Reference: 2715810.C0
The famous MHR Vl18 valves! Guaranteed performance!
Reference: 144.405.003
HYPER RACING valves with diffuser, bonded, single-leaf for POLINI 103, 51, MINICROSS POLINI, APE ...