Reference: 213.0020
2 slats POLINI valves for valve box and casings without support Peugeot 103 and MBK 51
Valves for POLINI, DR RACING, ATHENA ...
Banner
For all your Peugeot 103 sp, mv, mvl, lm… equipped with original casings, to improve your admission there are the famous POLINI valve boxes. This valve box in combination with a suitable carburetor will promote gas passage, power and recovery without adding too much dead volume in the intake.
Indeed, on Peugeot 103 the admission, the original valves are really badly made and badly studied, they enter very quickly in frequency of vibrations if only because of how they are placed.
This box will therefore be much better placed, it passes through 2 very good quality 0.30mm carbon slats in order to have a much better curve. You can also add the article vulcanized valve box to further increase the performance of your moped. This complete POLINI valve box will especially win you in high speeds. We advise to remove the stops slats on this box, they really obstruct the admission too.
This box is 15mm in size so intended for Ø14 to 16mm DELLORTO SHA rigid carburettors (19mm fixing)
Between the 15 and 19mm model, only the pipe changes. You can very well make pass a 15 in 19 and vice versa.
The pack is delivered complete :
-Extension box
-Full screws
-Pack full seal
-Valves 2 carbon 0.30mm slats
-Pipe rigid aluminum in 15mm
- Explanatory note, advice and assembly
Reference: 213.0020
Valves for POLINI, DR RACING, ATHENA ...
Reference: 215.0308
The replacement pipe for valves boxes POLINI on PEUGEOT 103 SP, MV, LM ...
Reference: 209.0260
Complete gasket set for POLINI valve box on PEUGEOT 103.
Reference: 20 6856
Ideal for increasing performance, especially with a large kit, a pack that includes everything needed between the carburettor and the crankcases. Have
Reference: 27 5614.C0
A premium carbon blade set, ideal for optimal adjustment.
Reference: 002312
The only vulcanized valves on the market for PEUGEOT 103, with the added advantage of fiberglass slats!
Reference: 27 5616.C0
A specific high-end set for your VL1 valves! Set your machine to perfection by choosing the best thickness and choosing noble materials for your slats!
Reference: CAL02RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on PEUGEOT 103 engine with POLINI housings, with built-in brackets.
Reference: 213.0524
Ideal for improving your performance.
Reference: 213.0013
RACING valves with diffuser, mono-slats for housings POLINI 103, 51, MINICROSS POLINI , APE...
Reference: 1213035B
An obligatory product for a perfect functioning of the gas supply.
Reference: 213.0017
Delivered with pipe and valve seal, carbon single-blade with refined stops ... The top for 103!
Reference: 27 2643.K0
The luxury version of the VL7, an aluminum base, vulcanized ...
Reference: 27 2356.K0
Racing valves with a very studied base passed in single-leaf, available in karbonit or carbon!
Reference: 20 6138
Ideal to put a carburetor DELLORTO 21 PHBG on your PEUGEOT XP using a system of real valves!
Reference: 247766
Valves mounted in mono-lamelle fiberglass for your 103.
Reference: 144.405.003
HYPER RACING valves with diffuser, bonded, single-leaf for POLINI 103, 51, MINICROSS POLINI, APE ...
Reference: 2715810.C0
The famous MHR Vl18 valves! Guaranteed performance!
Reference: 27 4235.K0
Valves that are suitable for both small and large configurations.