Banner
A "kit of transformation" for the passage of a carburetor SHA 15/16 flexible mounting (great for erasing the harmful vibration performance). With a studied venturi.
Unique, DOPPLER proves once again his knowledge and his revolutionary innovations. Indeed, thanks to flexible sleeve you can install a carburettor SHA 15 / 16mm on an intake pipe for carburetor scheduled from 19 to 21mm. The goal is simple, erase the harmful vibrations thanks to flexible mounting, and get the perfect venturi for performance in combination with a pipe large diameter! 
The rubber is quality, the collars are provided and finish is very good. In addition, an aluminum ring is delivered and this is the "element" key of the processing kit. This ring provides a venturi effect and much better leader admission gasses directly to the valves without rebounds, ... 
This pliable share its quality and avoid material adverse vibration motors and therefore the emulsions of gases. To better explain the role and setup of this conversion kit, here are two photos below with an intake pipe for carburetor 19 to 21mm with a carburettor SHA DELLORTO 15.
Features:
-length Total of 32mm sleeve
-Diameter Outside of the sleeve 42mm
Anti-slip -Lèvres internally on each side
-1st Side Ø26 to 28mm
-2nd Side Ø24 to 26mm
-Bague Aluminum machined anti-slip lip
-Bague Machined conically / venturisée a Ø15 to 17.5mm diameter internally 
Reference: 293370
A quality sleeve that absorbs vibrations very well for better gas flow.
Reference: 491146
Ideal for transforming the rigid assembly of its SHA carburetor into a flexible assembly!
Reference: 477451
A sleeve that absorbs vibrations while keeping the price low.
Reference: GOM-03
Flexible flexible sleeve, fixing Ø31 and 34mm on each side!
Reference: 13300118
BIDALOT flexible sleeve for carburettor PHBG.
Reference: 1311128B
Specially designed to mount flexible mounting PHBGs on a pipe intended for a rigid PHBG.
Reference: GOM-01
Pliable quality, fixing Ø33 to 36mm on each side!
Reference: 9908990
High-end flexible TPR sleeve for MIKUNI TM24 carburetor and large carburetors PHBG, PHBL ... with mounting diameter 24 to 26mm.
Reference: 13 6085B
Specially designed to mount flexible mounting PHBGs on a pipe intended for a rigid PHBG. Model with greater length (37mm).
Reference: 10873
A good quality sleeve, ideal for mounting carburetors PHBG flexible up to 21mm on aluminum pipes provided for this purpose.
Reference: 293370
A quality sleeve that absorbs vibrations very well for better gas flow.
Reference: 491146
Ideal for transforming the rigid assembly of its SHA carburetor into a flexible assembly!
Reference: 13 6110B
Specific carburettor kits sleeve labels the group MALOSSI on PEUGEOT 103, no mounting on other applications if desired!
Reference: 13 4929B
Flexible upscale sleeve Ø35mm fixing each side! Special carburetor and big thrust configuration!
Reference: GOM-04
Quality flexible sleeve, Ø35 fixing at 37mm on each side!
Reference: 13 4814B
An ideal carburetor / pipe connecting sleeve for large carburetors such as PHBH, PHBL, TM, ...
Reference: 223.0124
Specially designed to mount CP POLINI carburettors, can also be mounted on others like the PHBG!
Reference: GOM-02
Quality flexible sleeve, fixing Ø34 to 38mm on each side!
|
€10.830
|
delete
|
|
|
The product is no longer available in this quantity.
|
|||
|
€8.330
|
delete
|
|
|
The product is no longer available in this quantity.
|
|||
A "kit of transformation" for the passage of a carburetor SHA 15/16 flexible mounting (great for erasing the harmful vibration performance). With a studied venturi.
