Reference: 503842
CGN brake pad axle circlips for BREMBO Ø5mm calipers
Ideal in case of breakage or wear of your old circlip.
Banner
REPLAY steel bolts kit for any scooter equipped with a Minarelli Vertical engine such as the MBK Booster, YAMAHA Bw's ... and many other models.
Ideal to give a new aspect to the engine of your machine or quite simply to replace your screws because their footprint is damaged, these screws can of course be used for other purposes.
They are of very good quality, made of steel.
This very complete set contains 12 housing screws:
Ø6x25mm
Ø6x40mm
Ø6x45mm
Mounts on:
MBK BOOSTER 50
YAMAHA BW'S 50
And many other models ... (for any scooter equipped with a Minarelli Vertical engine).
Reference: 503842
Ideal in case of breakage or wear of your old circlip.
Reference: 19 9787
Quality wheel axle for your F37R fork!
Reference: 501640
Replacement banjo screw for your scooters, mécaboites 50cc.
Reference: 171120
A good quality pieces of kit that will give style to your scooter.
Reference: 455398
Fairing screws of very good quality that will give style to your scooter.
Reference: 478431
Essential for proper attachment of your body panels, fairings or other uses Large model. 12.5 X 20 X 4.5 X 0.6 mm.
Reference: 9018305X0300
Indispensable for a good fixing of your body parts, fairings or other uses.Original YAMAHA part
Reference: 250898
A good quality crankcase kit that will give style to your scooter.
Reference: 9010508X1500
Original YAMAHA drain plug for scooter MBK BOOSTER, NITRO, YAMAHA AEROX, BW'S ... from 2004
Reference: 0813271
Set of spacers for your F37R fork!
Reference: 455393
Spare screw for your 50cc scooter.
Reference: 491682
Support MAXI SCOOTER SHAD top case adaptable for YAMAHA NEOS and MBK OVETTO after 2008.
Reference: 172203
Ideal for a safe and clean installation of your original fairings on MBK 51 or other uses.
Reference: 481459
Brake nut M12 X 1,25mm for front wheel, model with blue nylon ring. For many Peugeot 50cc scooter models or other applications.
Reference: 481458
Locknut M10 X 1.25 mm for front wheel model with blue nylon ring. For many scooter models 50cc or other applications.
Reference: 481461
Locknut M12 X 1.25 mm for front wheel model with blue nylon ring. For many scooter 50cc models such as Piaggio Typhoon or other applications.