Exhaust MALOSSI MHR BIG BORE 3 for scooter PIAGGIO / GILERA (Typhoon, NRG ...)

Here is the pot MHR TEAM! This pot is studied on the run and is used for trophy race MALOSSI 70cc scooter. It allows especially a big performance gain in medium and high speed. This jar is sealed with a special steel 8 / 10mm thickness welded TIG and MIG. It is of course oxyacetylene welded folded hand by craftsmen. In addition to being powerful it has a neat aesthetic side thanks to its magnificent exposed seams, a dough attachment molded aluminum with the brand logo, a bright high end varnish extra .... A silent satin anodized aluminum blue night ...

 

Warning, this exhaust is mounted only on the aluminum cylinder. H2O 7T MHR TEAM!

 

Description MALOSSI:

 

The new range of MHR pot has been studied by CAD systems and defined for each 50cc scooter. After very severe tests in the Malossi Engineering test room, equipped with the most modern and sophisticated equipment, the research and development department engineers were able to improve the performance of different vehicles. The MHR exhaust systems address a sporting and demanding customers, they personalize your scooter with elegance and with a powerful sound, completing the thermodynamic cycle of the famous Malossi MHR. POT SCOOTER RACING "The race muffler born in the race for the race" is one of the essential components intended for MALOSSI SCOOTER 70cc trophy, specially designed to give the engine a good increase in power at medium and high regimes. Malossi Trophies are conducted worldwide according to specific formulas that provide regulations combinations MALOSSI special products for each category in order to obtain consistent and optimal results between competitors through the use of the technology advanced. With the SCOOTER RACING pot Malossi expands its range of trophy exhaust systems, that represents the highest performances in the sector. Another initiative Malossi to provide opportunities for youth to practice sports in the world of two wheels to become the drivers of the future.

SPECIFICATIONS:

POT special steel exhaust (8/10 mm thick), robotic TIG and MIG welding and manual welding oxyacetylene folded craftsmen. Transparent varnish.
SILENT aluminum with satin finish.

Ø47.6mm

 

Itself on:

 

Make Model
Aprilia Aprilia SR (carb.) 50 LC 2T 2004-> (Piaggio)
CONNECTING WITH ONLY gr.therm. 3115142 / .T0

Aprilia Aprilia SR R (carb.) 50 2T LC (Piaggio)

CONNECTING WITH ONLY gr.therm. 3115142 / .T0

Aprilia Aprilia SR 50 Street 2T LC euro 2
CONNECTING WITH ONLY gr.therm. 3115142 / .T0

Derbi Derbi GP1 50 2T LC
CONNECTING WITH ONLY gr.therm. 3115142 / .T0

Derbi Derbi GP1 OPEN 50 2T LC
CONNECTING WITH ONLY gr.therm. 3115142 / .T0

Derbi Derbi GP1 REVOLUTION LC 50 2T
CONNECTING WITH ONLY gr.therm. 3115142 / .T0

GILERA GILERA DNA 50 2T LC
CONNECTING WITH ONLY gr.therm. 3115142 / .T0

GILERA GILERA RUNNER SP 50 2T LC <-2005
CONNECTING WITH ONLY gr.therm. 3115142 / .T0

GILERA GILERA RUNNER SP 50 2T LC 2006-> (C451M)
CONNECTING WITH ONLY gr.therm. 3115142 / .T0

GILERA GILERA RUNNER 50 2T LC
CONNECTING WITH ONLY gr.therm. 3115142 / .T0

MALOSSI MALOSSI C-ONE 5715844 50 2T LC (Piaggio-ruota 12/13)
CONNECTING WITH ONLY the gr.therm. 3115142 and 3115142.T0

PIAGGIO PIAGGIO NRG EXTREME 50 2T LC
CONNECTING WITH ONLY gr.therm. 3115142 / .T0

PIAGGIO PIAGGIO NRG MC2 50 2T LC <-1997
CONNECTING WITH ONLY gr.therm. 3115142 / .T0

PIAGGIO PIAGGIO NRG MC2 50 2T LC 1998->
CONNECTING WITH ONLY gr.therm. 3115142 / .T0

PIAGGIO PIAGGIO NRG 50 2T LC
CONNECTING WITH ONLY gr.therm. 3115142 / .T0

 

PIAGGIO PIAGGIO NRG MC3 DD 50 2T LC
CONNECTING WITH ONLY gr.therm. 3115142 / .T0

PIAGGIO PIAGGIO NTT 50 2T LC
CONNECTING WITH ONLY gr.therm. 3115142 / .T0

 

PIAGGIO PIAGGIO NRG Power DD 50 2T LC

CONNECTING WITH ONLY gr.therm. 3115142 / .T0

 

PIAGGIO PIAGGIO QUARTZ 50 2T LC
CONNECTING WITH ONLY gr.therm. 3115142 / .T0

PIAGGIO PIAGGIO ZIP SP 50 2T LC 2001->
CONNECTING WITH ONLY gr.therm. 3115142 / .T0

PIAGGIO PIAGGIO ZIP SP 50 2T LC <-2000
CONNECTING WITH ONLY gr.therm. 3115142 / .T0