Reference: 206.0142
Chrome steel segment Ø64X1,2mm for POLINI 165cc kit on 125cc CAGIVA ALETTA ROSSA, DAKAR, ELEFANT and other 2 times
To be changed at the slightest loss of compression, generally within 5000 to 6000km!
Banner
Piston bi-segment Ø64mm POLINI, for kit 165cc on CAGIVA MITO, PLANET, RAPTOR, FRECCIA, TAMANACO and other 2 times. We have wear sizes A / B / C and D, to be selected according to the wear of your cylinder. The piston is complete, so it contains the piston, the two high quality steel segments, the piston pin and finally the two clips in G.
Formerly delivered as presented above but the old version of the piston presented some defects, that's why a new version was made by correcting the flaws preview, POLINI took the opportunity to add a preparation on the rear skirt so to improve the sweeping and filling of the intake as well as 2 lateral grease nipples. So do not be surprised to receive the new version as in the main photo.
A: Ø63,92mm
B: Ø63.93mm
C: Ø63.94mm
D: Ø63,95mm
CAGIVA MODEL C10 and C12 (a special C9 version is available)
Reference: 206.0142
To be changed at the slightest loss of compression, generally within 5000 to 6000km!
Reference: 272.0100
Piston clips for Ø16mm axle, often used from 125cc!
Reference: 209.0133
Ideal for reassembly without risk of leakage!
Reference: P-392
Original type piston Ø56mm for HONDA MBX and MTX 125.
Reference: S4F056500010
The spare piston for 125cc and twin-cylinder 240cc YAMAHA 2T!
Reference: 01.2245.000
PROX piston for YAMAHA DT, DT X, TDR, DT R... 125 3M B ENGINE
Reference: 204.0008/A
Ideal for refurbishing your POLINI kit on your CAGIVA motorbikes! C9
Reference: P-610-SA
BARIKIT piston for old CASAL 125 2T motorcycle.
Reference: PI.01.58A.VG
VERTEX / ITALKIT mono-segment piston for high 140cc ITALKIT engine on ROTAX 122 and 123 from ARPRILIA RS, AF1, FUTURA, RS, PEGASO, TUAREG, RALLY, SIYNTESI, RX, RED ROSE ...
Reference: A4827 - 51.01G
Special piston for CAGIVA ALETTA, ELEFANT, DAKAR ... 125 2T
Reference: 01.2252.050
PROX piston for YAMAHA DT 125 2T 18G engines (cylinder with valves, air cooling).
Reference: 204.0296/A
The complete replacement piston for the 154cc POLINI kit!
Reference: PI.07.56A.VG
Ideal for refurbishing your ITALKIT aluminum kit on your CAGIVA 125cc motorcycles.
Reference: PI.01.54A.VG
VERTEX / ITALKIT piston in Ø54mm bi-segments for high original engines and ITALKIT on the ROTAX 122 and 123 of ARPRILIA RS, AF1, FUTURA, RS, PEGASO, TUAREG, RALLY, SIYNTESI, RX, RED ROSE ...
Reference: P-650-SA
BARKKIT piston for 4FU engines of TZR, GPR, TDR, DTR, DT X, DT E ... 125 2T.
Reference: P-537-A
BARIKIT bi-segment piston for original high engine and BARIKIT on the ROTAX 122 of APRILIA RS, AF1, EUROPA, PEGASO, and other 2 times.
Reference: 204.0295/B
The complete replacement piston for the kit 154cc POLINI!
Reference: PI.01.57A.VG
The replacement piston for the original 125cc single-cylinder and 250cc twin-cylinder, several ribs available!
Reference: P-536-1A
Single segment BARIKIT piston for original high engine and BARIKIT on the ROTAX 122 of APRILIA RS, AF1, EUROPA, PEGASO, and other 2 times.