Reference: S.I5500008
Segment Ø50mm ITALKIT kit for aluminum, cast MHR Team Big Bore ... minarelli am6, Derbi scooter ...
End chromed spare steel segment ITALKIT piston am6, derbi, scooter ...
Banner
ITALKIT complete piston for kits MALOSSI MHR & POLINI diameter 50mm. Very high-end piston with specific surface treatment, design and advanced study. Equipped with side grease nipples and a special cut at the level of the skirt. We have of course the ribs A (49.95mm) / B (49.96mm) / C (49.97mm) and 50.25 & 50.50mm depending on the wear of your cylinder. Generally on these cylinders, the passage in B is advised to 8000 see 10 000 km Delivered with its axis diameter Ø12mm X 40mm, clips in reinforced C 1mm, segment steel 0.8mm chrome finish.
This piston applies to the following kits:
Kit 3113036 MHR big bore 77cc on minarelli horizontal liquid engine
Kit 3113030 MHR big bore 77cc on liquid PIAGGIO engine
Kit 3113221 MHR 80cc on DERBI euro 2 engine
Kit 3111985 MHR 80cc on DERBI euro 3 engine
Kit 3112609 MHR 80cc on minarelli am6 engine
Kit 3112386 MHR team 80cc on minarelli am6 engine
Kit 3112988 MHR team 80cc on DERBI euro 3 engine
Kit 3112376 MHR team 80cc on DERBI euro 2 engine
and other models ...
Some kits are basic bi segment, it is of course possible to pass in mono segment. This will increase the high speeds thanks to the greatly reduced friction.
Be careful not to forget to choose your side of wear & reaming before adding to the basket.
Reference: S.I5500008
End chromed spare steel segment ITALKIT piston am6, derbi, scooter ...
Reference: G-211-BZ
Perfect for refurbishing your BARIKIT kit. Piston to be changed every 8,000 to 10,000 km!
Reference: 06131448
A good quality piston, delivered complete for a refurbishment of your cylinder.
Reference: 33130.M
A high-end piston with several sizes to choose from to best suit your cylinder.
Reference: 57840.02A
Piston by VERTEX mono high-end segment for kit 80 and 90cc diameter 50mm.
Reference: S410480308003
Ideal for the maintenance of your 70cc ATHENA RACING kit!
Reference: 06135850
A good quality piston, delivered complete for a refurbishment of your cylinder.
Reference: PI.44.52A.14
Spare piston of excellent quality for kit ITALKIT 95cc Ø52mm minarelli am6.
Reference: 06133348
Quality piston kit for your 70 AIRSAL.
Reference: PI.44.52A.I
Excellent quality replacement piston for ITALKIT 84cc Ø52mm minarelli am6 kit.
Reference: PI.63.50A.I
VERTEX very high quality piston, specifically for TOP PERFORMANCES aluminum kits (maxikit TPR 86cc, 80cc TPR kit ...) on minarelli am6!
Reference: PI.44.48A.V1
Replacement complete graphite single segment piston, top-of-the-range model from VERTEX for high engine kit 75 and 80cc am6.with 42mm or 44mm long stroke! Can also be mounted on kit with 44mm stroke on HONDA NSR 75cc!
Reference: 3411695.A0
Complete high-end piston for MALOSSI 80cc Ø50mm kit on AM6 & DERBI.
Reference: 992414A
Top of the range TOP PERFORMANCES RACING TPR replacement piston for minarelli am6.
Reference: 229.0591
A good quality piston and finish changing every 5,000 to 6,000 km maximum for peak performance.
Reference: H06138248
A good quality piston to change every 7000 km that mounts on the AIRSAL iron 70cc.
Reference: 11335966
Piston forged high-end parts for kit BIDALOT FACTORY 86, 88 and 94cc on DERBI, AM6 Minarelli and Horizontal.