Reference: 2017588
Pipe of admission MALOSSI Ø15mm by 19mm (SHA) Peugeot 103 special vogue
Special pipe for peugeot 103 vogue, ideal in combination of a carburetor of 15mm SHA and a valve sport!
Banner
MALOSSI intake pipe d.15mm inside and 19mm outside (carburetor fixing), for female carburettors. We regret the absence of an internal microbillage but accompanied by good valves it will allow you good performance.
For Peugeot 103 sp, mv, mvl, lm, vogue ... Does not mount on Peugeot 103 spx, rcx, clip.
Reference: 2017588
Special pipe for peugeot 103 vogue, ideal in combination of a carburetor of 15mm SHA and a valve sport!
Reference: 1403
A pipe which will be perfect accompanied by a carburettor PHBG 19 to 21mm. This pipe is blasted with a good finish to avoid the rebound of gases.
Reference: 516867
A shorter pipe for a better venturi effect. It will be perfect with a 19 to 21mm carburettor.
Reference: 1314916B
Ø32mm spare sleeve angled at 90 ° internal for MALOSSI admission kit on VESPA 80, 125, 200 ...
Reference: 215.0225
Very good POLINI intake pipe for fitting 17.5 to 21mm PHBG carburettors.
Reference: CAL02RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on PEUGEOT 103 engine with POLINI housings, with built-in brackets.
Reference: 20 6138
Ideal to put a carburetor DELLORTO 21 PHBG on your PEUGEOT XP using a system of real valves!
Reference: 1400
An amazing pipe with a very good finish that will agree very well with a carburetor 18 to 21mm.
Reference: 02 6489B
A pipe specially designed for flexible assemblies. This pipe was specially created for the competition. It is therefore mounted with a flexible PHBG carburetor from 15 to 21mm.
Reference: 215.0308
The replacement pipe for valves boxes POLINI on PEUGEOT 103 SP, MV, LM ...
Reference: pack_pipe_malossi_AM6_DERBI_90°
MALOSSI pipe for adaptation on PEUGEOT 103 / MBK 51 requiring an angled admission! Center distance am6 / DERBI
Reference: 02 6488B
A pipe that mounts very well with a PHBG from 17.5 to 21mm. This pipe is corrected and revised for better distribution.
Reference: 02 6487B
The best to accompany a 15 or 16mm SHA carburetor on your 103!
Reference: 1402
An intake pipe with a good finish that will allow you to mount your carburetor Ø14 to 16mm while gaining power.
Reference: 215.0226
Intake pipe ideal for fitting SHA 15 or 16mm carburettors.