Reference: 247766
Inlet valves DOPPLER ER2 fiberglass for casings origin peugeot 103
Valves mounted in mono-lamelle fiberglass for your 103.
Banner
Ideal for mounting your flexible carburetors from 19 to 21mm, the intake pipe is the more upscale market for Peugeot 103, it is extremely short and well venturisée / studied.
It has a machining (label type) to set a flexible sleeve, the latter is also included with this pipe, and 2 clamps, you can install your carburetor 19 has 21mm flexible mounting (mounting diameter the sleeve 21 is 25mm).
DOPPLER logos are registered on each side of the pipe, remember that the flexible mounting avoids the emulsion of gas, vibrations and jolts in the carburetor, the assembly therefore do well improve performance!
Reference: 247766
Valves mounted in mono-lamelle fiberglass for your 103.
Reference: 365117
Valves mounted in mono-slat carbon 0.35mm for your 103!
Reference: 293370
A quality sleeve that absorbs vibrations very well for better gas flow.
Reference: CAL02RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on PEUGEOT 103 engine with POLINI housings, with built-in brackets.
Reference: 02 1690B
An intake pipe adapted for a carburettor of 15mm or 16mm SHA on PEUGEOT 103!
Reference: 1400
An amazing pipe with a very good finish that will agree very well with a carburetor 18 to 21mm.
Reference: 215.0227
High quality intake pipe for mounting PHBG carburetors from 17.5 to 21mm.
Reference: 02 5035B
The best to repair or modify the size of your MALOSSI valve boxes on your PEUGEOT 103 or MBK 51.
Reference: 215.0370
Intake pipe for POLINI support housings incorporated on PEUGEOT 103.
Reference: 1314916B
Ø32mm spare sleeve angled at 90 ° internal for MALOSSI admission kit on VESPA 80, 125, 200 ...
Reference: 215.0226
Intake pipe ideal for fitting SHA 15 or 16mm carburettors.
Reference: 02 6489B
A pipe specially designed for flexible assemblies. This pipe was specially created for the competition. It is therefore mounted with a flexible PHBG carburetor from 15 to 21mm.
Reference: 928.270.006
POLINI pipe for THOR engine or adaptation on PEUGEOT 103 / MBK 51 requiring an elbow admission!
Reference: 496075
Ideal in case of breakage or wear your old room.
Reference: 215.0308
The replacement pipe for valves boxes POLINI on PEUGEOT 103 SP, MV, LM ...
Reference: 1403
A pipe which will be perfect accompanied by a carburettor PHBG 19 to 21mm. This pipe is blasted with a good finish to avoid the rebound of gases.
Reference: 1399
Ideal in case of breakage or wear of your old part.
Reference: 215.0225
Very good POLINI intake pipe for fitting 17.5 to 21mm PHBG carburettors.
Reference: 02 6487B
The best to accompany a 15 or 16mm SHA carburetor on your 103!