Reference: 516867
Inlet pipe DOPPLER OPEN 3D Ø20mm (PHBG) flexible with sleeve for Peugeot 103
A shorter pipe for a better venturi effect. It will be perfect with a 19 to 21mm carburettor.
Banner
Here is the MALOSSI pipe of 20mm for Peugeot 103 SPX / RCX / MVX and CLIP, also arises on VOGUE which require a fairly long assembly. This intake pipe is a model specially designed for flexible mounting. It is a label version because it is specially machined and was used for group 1 (with PHBG 15mm) and 2 (with PHBG 19mm) competitions.
The fixing diameter is therefore 23mm, you can put a flexible sleeve there with a flexible PHBG carburetor with a diameter of 19 to 21mm recommended (malossi also mounted the 15mm with this pipe). The finish is good, it is worked at the level of the duct to obtain a good venturi effect. It has a lateral location for the installation of a lung or other after making a thread.
Reference: 516867
A shorter pipe for a better venturi effect. It will be perfect with a 19 to 21mm carburettor.
Reference: 215.0370
Intake pipe for POLINI support housings incorporated on PEUGEOT 103.
Reference: 02 6238B
A pipe specially designed for MALOSSI housings. It is very short with good diffusion, micro-blasted and with horizontal bars to avoid any gas rebounds. Clearly a very well worked pipe which will be accompanied by a VL6 valve box or other AM6 valve and a 21mm carburetor.
Reference: 1403
A pipe which will be perfect accompanied by a carburettor PHBG 19 to 21mm. This pipe is blasted with a good finish to avoid the rebound of gases.
Reference: 20 6138
Ideal to put a carburetor DELLORTO 21 PHBG on your PEUGEOT XP using a system of real valves!
Reference: 1399
Ideal in case of breakage or wear of your old part.
Reference: 1314916B
Ø32mm spare sleeve angled at 90 ° internal for MALOSSI admission kit on VESPA 80, 125, 200 ...
Reference: CAL02RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on PEUGEOT 103 engine with POLINI housings, with built-in brackets.
Reference: 496075
Ideal in case of breakage or wear your old room.
Reference: PIP07
Intake pipe for carburetor in flexible assembly from 15 to 21mm.
Reference: 2017588
Special pipe for peugeot 103 vogue, ideal in combination of a carburetor of 15mm SHA and a valve sport!
Reference: 56251.05
Ideal with a carburettor PHBG 19 to 24mm and achieve maximum performance! Model "finned" for mob Peugeot 103 SPX, RCX ...
Reference: 144.270.001
Flexible polini pipe 21mm for mini-moto and cross 2T POLINI, or mounting on POLINI crankcases with PEUGEOT 103 and MBK 51 supports!
Reference: 02 6488B
A pipe that mounts very well with a PHBG from 17.5 to 21mm. This pipe is corrected and revised for better distribution.
Reference: 02 5035B
The best to repair or modify the size of your MALOSSI valve boxes on your PEUGEOT 103 or MBK 51.