Reference: 215.0330
Inlet pipe for POLINI casings without support incorporated on Peugeot 103 (Ø 15 or 19mm with the choices)
Banner
Polini admission pipe for Peugeot 103 SPX, RCX, MVX and CLIP ... does not fit on sp, mv, mvl, lm, vogue ...! Aesthetic level is the must, top finish with its small POLINI logo on the side. For carburetors from 17.5 to 21mm, for the best take a Ø20mm DELLORTO PHBG.
The fixing is of diameter 24mm rigid (thus rigid PHBG). Very high quality, we regret that it is not microbillée internally. Pipe outlet 27 by 23mm.
Reference: 215.0308
The replacement pipe for valves boxes POLINI on PEUGEOT 103 SP, MV, LM ...
Reference: 02 6489B
A pipe specially designed for flexible assemblies. This pipe was specially created for the competition. It is therefore mounted with a flexible PHBG carburetor from 15 to 21mm.
Reference: 144.270.001
Flexible polini pipe 21mm for mini-moto and cross 2T POLINI, or mounting on POLINI crankcases with PEUGEOT 103 and MBK 51 supports!
Reference: 02 1690B
An intake pipe adapted for a carburettor of 15mm or 16mm SHA on PEUGEOT 103!
Reference: PIP07
Intake pipe for carburetor in flexible assembly from 15 to 21mm.
Reference: 56251.05
Ideal with a carburettor PHBG 19 to 24mm and achieve maximum performance! Model "finned" for mob Peugeot 103 SPX, RCX ...
Reference: 02 6238B
A pipe specially designed for MALOSSI housings. It is very short with good diffusion, micro-blasted and with horizontal bars to avoid any gas rebounds. Clearly a very well worked pipe which will be accompanied by a VL6 valve box or other AM6 valve and a 21mm carburetor.
Reference: CAL02RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on PEUGEOT 103 engine with POLINI housings, with built-in brackets.
Reference: 516867
A shorter pipe for a better venturi effect. It will be perfect with a 19 to 21mm carburettor.
Reference: 365641
A shorter pipe for better venturi effect. This pipe is the highest end of the market. It will be perfect with a carburetor 19 to 21mm.
Reference: 215.0370
Intake pipe for POLINI support housings incorporated on PEUGEOT 103.
Reference: 02 2083B
The top of the intake pipe to put your PHBG 17.5mm to 21mm on your 103.
Reference: 02 6488B
A pipe that mounts very well with a PHBG from 17.5 to 21mm. This pipe is corrected and revised for better distribution.
Reference: 215.0225
Very good POLINI intake pipe for fitting 17.5 to 21mm PHBG carburettors.
Reference: 1400
An amazing pipe with a very good finish that will agree very well with a carburetor 18 to 21mm.