Reference: 1402
TEKNIX intake pipe Ø15mm by 19mm (SHA) Peugeot 103 spx / rcx / clip / mvx
An intake pipe with a good finish that will allow you to mount your carburetor Ø14 to 16mm while gaining power.
Banner
Polini intake pipe for Peugeot 103 SPX, RCX, MVX and CLIP… cannot be mounted on sp, mv, mvl, lm, vogue…! Aesthetic level is the must, top finish with its small POLINI logo on the side. For 14 to 16mm carburetors, for the best take a Ø15mm or 16mm DELLORTO SHA.
The binding is rigid 19mm diameter. Very high quality, we simply regret that it is not blasted internally. Pipe outlet 27 by 23mm.
Reference: 1402
An intake pipe with a good finish that will allow you to mount your carburetor Ø14 to 16mm while gaining power.
Reference: pack_pipe_malossi_AM6_DERBI_90°
MALOSSI pipe for adaptation on PEUGEOT 103 / MBK 51 requiring an angled admission! Center distance am6 / DERBI
Reference: 02 2083B
The top of the intake pipe to put your PHBG 17.5mm to 21mm on your 103.
Reference: 02 1690B
An intake pipe adapted for a carburettor of 15mm or 16mm SHA on PEUGEOT 103!
Reference: 215.0370
Intake pipe for POLINI support housings incorporated on PEUGEOT 103.
Reference: 1403
A pipe which will be perfect accompanied by a carburettor PHBG 19 to 21mm. This pipe is blasted with a good finish to avoid the rebound of gases.
Reference: 215.0227
High quality intake pipe for mounting PHBG carburetors from 17.5 to 21mm.
Reference: 02 6488B
A pipe that mounts very well with a PHBG from 17.5 to 21mm. This pipe is corrected and revised for better distribution.
Reference: 365641
A shorter pipe for better venturi effect. This pipe is the highest end of the market. It will be perfect with a carburetor 19 to 21mm.
Reference: 215.0225
Very good POLINI intake pipe for fitting 17.5 to 21mm PHBG carburettors.
Reference: CAL02RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on PEUGEOT 103 engine with POLINI housings, with built-in brackets.
Reference: 1399
Ideal in case of breakage or wear of your old part.
Reference: 56251.05
Ideal with a carburettor PHBG 19 to 24mm and achieve maximum performance! Model "finned" for mob Peugeot 103 SPX, RCX ...
Reference: PIP07
Intake pipe for carburetor in flexible assembly from 15 to 21mm.
Reference: 02 6487B
The best to accompany a 15 or 16mm SHA carburetor on your 103!