Banner
A good quality pipe with a near perfect finish for an affordable price.
Here the non adjustable TUN 'R pipe, the intake pipe is made to stay straight. It is scheduled for carburettors Ø24 has 26mm on mécaboite minarelli am6. The pipe is made of aluminum (we regret the absence of an internal peening) and the finish is really good! On the side of the pipe, a small plug is present, you can use it to connect your separate lubrication (oil arrived) or depression of the fuel tap. 
You can also replace the outlet with a screw if you do not have a use for it is threaded. The pipe comes with 1 sleeves to allow you to mount a 26mm carburettor Ø24. The sleeve has an internal pipe side lip lock and anti-slip carburetor side.
Plus, to top it off the intake pipe is supplied with the pipe joint, the high quality 4 fixing screws and 2 cable ties. The pipe has a big release, therefore accompany big correct input valves.
Carburetor mounting:
1 sleeve Ø29 has 32mm (for DELLORTO PHBL, MIKUNI TM 24 ... and other models)
25mm internal diameter Ø24 carburettor has 26mm
Reference: 9929240
Replacement for TPR orientable intake pipes with MIKUNI TM 24 and OKO 28 carburettor on mécaboite Minarelli AM6 and DERBI.
Reference: 2013800
The high-end and ultra-efficient Viton version!
Reference: 494635
Optimize the performance of your mécaboite!
Reference: 477414
Very good price / quality ratio, ideal to ask a rigid carburettor.
Reference: 10870
A pipe with a correct finish which will allow you to mount your carburetors from 19 to 26mm.
Reference: 25526
A quality aluminum pipe to replace the old one.
Reference: 487209
A good quality pipe with an almost perfect finish for a price more than affordable!
Reference: 524153
An original type BETA RR intake pipe, ideal for am6 center distance assemblies that require an angled intake pipe!
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: 215.0427
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 9930900
High-end TPR intake kit, 360 ° swiveling, flexible mounting specially designed to accompany a MIKUNI TM24 carburetor or carburetor of this size on AM6 & DERBI.
Reference: 075805
An intake pipe very well designed, ideal to accompany a push engine configuration.
Reference: 9919270
Pipe replacement inlet diameter 24mm carburettor MIKUNI TM24 or other flexible mount models.
Reference: 215.0439
Special intake pipe for POLINI CP 23 and 24mm carburetors. 360 ° swivel with 40 ° tilt angle.
Reference: 215.0397
Pipe of admission Ø19mm, ideal for laying a rigid 21mm PHBG 17.5 has a motorcycle that requires a bent pipe as the Aprilia RX, MX 50 ...
Reference: LC.44.35
One of the best price / quality ratio for carburetor 28 to 35mm. Reserved for connoisseurs!
A good quality pipe with a near perfect finish for an affordable price.
