Reference: 317.0005
Stud POLINI M6 X 32mm for exhaust, pipe admission ...
Set of 2 M6 studs that can be used for many applications.
Banner
Here is the POLINI Evolution orientable intake pipe for mécaboite driving DERBI euro 1, 2 & 3 and for MINARELLI AM6 engine! This pipe is really at the top, first of all you orient it as you wish to place the carburetor as you want! Its position is designed for PHBG or other model carburettors and its internal diameter is designed for 15 to 21mm carburetors. Its fixing diameter is from Ø23 to 25mm. To avoid harmful vibrations and jolts, the sleeve is made of specific Viton.
Rigid enough so that the pipe does not crack or break when tightening. Even on the aesthetic side, we feel that POLINI has really taken care of this piece as much as possible. No need to put a seal, a seal is pre-integrated into the junction, moreover it is delivered with instructions, screws ... Clearly, thanks to a perfect diffusion, absorption of vibrations, a good position ... The performance gain will be present and felt!
-For DELLORTO PHBG carburettor, PHBG type carburettors… and other 19 to 21mm models.
-For POLINI CP carburettors from 15 to 21mm.
-Fixing carburetor Ø23 to 25mm.
-Internal diameter 21 to 24mm.
-Angle of inclination 20 °.
-Orientable 360 °.
A = Ø25mm
B = 21 -> 24
C = 20 °
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: 215.0428
Ideal for equipping a large, precise and efficient engine configuration! 360 ° swivel with 20 ° tilt angle.
Reference: 467799
The unbeatable quality / price / practicality ratio for your am6 engines!
Reference: CT00746
A good quality pipe with an almost perfect finish for a more than affordable price!
Reference: 9931740
TPR intake kit, 360 ° swivel, flexible assembly specially designed to accompany an OKO, PWK POLINI, FURYTECH, KEIHIN ... 24 to 28mm carburetor on AM6 & DERBI Ø34mm mounting.
Reference: 215.0439
Special intake pipe for POLINI CP 23 and 24mm carburetors. 360 ° swivel with 40 ° tilt angle.
Reference: 512119
A very well designed intake pipe, ideal to accompany a high engine configuration.
Reference: 10870
A pipe with a correct finish which will allow you to mount your carburetors from 19 to 26mm.
Reference: 0211199B
21mm pipe for HONDA MB, MT, MTX 50 / MINARELLI AM6 50 ...
Reference: 467798
A good quality pipe with a near perfect finish for an affordable price.
Reference: 9930900
High-end TPR intake kit, 360 ° swiveling, flexible mounting specially designed to accompany a MIKUNI TM24 carburetor or carburetor of this size on AM6 & DERBI.
Reference: 02 6639B
An intake pipe designed for large carburetion This pipe is short for faster recovery.
Reference: 215.0397
Pipe of admission Ø19mm, ideal for laying a rigid 21mm PHBG 17.5 has a motorcycle that requires a bent pipe as the Aprilia RX, MX 50 ...
Reference: 1773
A quality 360 ° swivel pipe to replace the old one Supplied with two 30 and 45 ° sleeves!
Reference: 075805
An intake pipe very well designed, ideal to accompany a push engine configuration.
Reference: 477414
Very good price / quality ratio, ideal to ask a rigid carburettor.