Reference: 1773
Adjustable REPLAY intake pipe for 17.5 to 21mm carburetor (Ø24mm fixing) for MINARELLI AM6 engine
A quality 360 ° swivel pipe to replace the old one Supplied with two 30 and 45 ° sleeves!
Banner
Here is the POLINI Evolution orientable intake pipe for mécaboite driving DERBI euro 1, 2 & 3 and for MINARELLI AM6 engine! This pipe is really at the top, first of all you orient it as you wish to place the carburetor as you want! Its position is designed for PHBG or other model carburettors and its internal diameter is designed for 15 to 21mm carburetors. Its fixing diameter is from Ø23 to 25mm. To avoid harmful vibrations and jolts, the sleeve is made of specific Viton.
Rigid enough so that the pipe does not crack or break when tightening. Even on the aesthetic side, we feel that POLINI has really taken care of this piece as much as possible. No need to put a seal, a seal is pre-integrated into the junction, moreover it is delivered with instructions, screws ... Clearly, thanks to a perfect diffusion, absorption of vibrations, a good position ... The performance gain will be present and felt!
-For DELLORTO PHBG carburettor, PHBG type carburettors… and other 19 to 21mm models.
-For POLINI CP carburettors from 15 to 21mm.
-Fixing carburetor Ø23 to 25mm.
-Internal diameter 21 to 24mm.
-Angle of inclination 20 °.
-Orientable 360 °.
A = Ø25mm
B = 21 -> 24
C = 20 °
Reference: 1773
A quality 360 ° swivel pipe to replace the old one Supplied with two 30 and 45 ° sleeves!
Reference: 590
A pipe that will increase performance while spending little.
Reference: 9929240
Replacement for TPR orientable intake pipes with MIKUNI TM 24 and OKO 28 carburettor on mécaboite Minarelli AM6 and DERBI.
Reference: 0211199B
21mm pipe for HONDA MB, MT, MTX 50 / MINARELLI AM6 50 ...
Reference: 2013800
The high-end and ultra-efficient Viton version!
Reference: 494635
Optimize the performance of your mécaboite!
Reference: 467799
The unbeatable quality / price / practicality ratio for your am6 engines!
Reference: 512119
A very well designed intake pipe, ideal to accompany a high engine configuration.
Reference: 2013801
A very high-end special for large carburations on MINARELLI AM6, DERBI ...
Reference: 215.0463
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 215.0397
Pipe of admission Ø19mm, ideal for laying a rigid 21mm PHBG 17.5 has a motorcycle that requires a bent pipe as the Aprilia RX, MX 50 ...
Reference: 075705
A very well designed intake pipe, ideal for accompanying a high engine configuration.
Reference: 02 6639B
An intake pipe designed for large carburetion This pipe is short for faster recovery.
Reference: 467798
A good quality pipe with a near perfect finish for an affordable price.
Reference: 9919270
Pipe replacement inlet diameter 24mm carburettor MIKUNI TM24 or other flexible mount models.
Reference: TUB-04
Special intake pipe for large diameter carburetors from 26 to 28mm like OKO ... 360 ° swiveling and ideal for large configurations.