Reference: 53405.05
Pipe of admission for flexible PARMAKIT carburetor Ø17,5 with 21mm on minarelli am6
Pipe of admission ideal to accompany a carburetor 17.5mm to 21mm!
Banner
Here is the POLINI Evolution orientable intake pipe for mécaboite driving DERBI euro 1, 2 & 3 and for MINARELLI AM6 engine! This pipe is really at the top, first of all you orient it as you wish to place the carburetor as you want! Its position is designed for very large carburetors and its internal diameter too (30mm, for 28 to 30mm carburetor).
Its fixing diameter is from Ø35 to 39mm. To avoid harmful vibrations and jolts, the sleeve is made of specific Viton. Rigid enough so that the pipe does not crack or break when tightening. Even aesthetic side we feel that POLINI has really taken care of this piece. No need to put a seal, a seal is pre-integrated into the junction, moreover it is delivered with instructions, screws… Clearly, thanks to a perfect diffusion, absorption of vibrations, a good position… The performance gain will be present!
-For PHBH, VHST, DELLORTO 28 and 30mm carburetors.
-Fixing carburetor Ø35 to 39mm.
-Internal diameter 30mm.
-Angle of inclination 20 °.
-Orientable 360 °.
A = Ø35mm
B = 30
C = 20 °
Reference: 53405.05
Pipe of admission ideal to accompany a carburetor 17.5mm to 21mm!
Reference: 9906940
Ideal to accompany the carburetors 19 to 21mm on your mécaboite minarelli am6.
Reference: LC.44.400
The must of the admission kits for large configuration with carburetor in 28 to 35mm. Reserved for connoisseurs! Hyper short, super diffusion, carburetor up to 35mm, vibration scrub ... Simply the best.
Reference: LC.44.35
One of the best price / quality ratio for carburetor 28 to 35mm. Reserved for connoisseurs!
Reference: 9919270
Pipe replacement inlet diameter 24mm carburettor MIKUNI TM24 or other flexible mount models.
Reference: 02 6639B
An intake pipe designed for large carburetion This pipe is short for faster recovery.
Reference: 467798
A good quality pipe with a near perfect finish for an affordable price.
Reference: 0211199B
21mm pipe for HONDA MB, MT, MTX 50 / MINARELLI AM6 50 ...
Reference: 9930900
High-end TPR intake kit, 360 ° swiveling, flexible mounting specially designed to accompany a MIKUNI TM24 carburetor or carburetor of this size on AM6 & DERBI.
Reference: 590
A pipe that will increase performance while spending little.
Reference: 512119
A very well designed intake pipe, ideal to accompany a high engine configuration.
Reference: 9929240
Replacement for TPR orientable intake pipes with MIKUNI TM 24 and OKO 28 carburettor on mécaboite Minarelli AM6 and DERBI.
Reference: 215.0427
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 215.0439
Special intake pipe for POLINI CP 23 and 24mm carburetors. 360 ° swivel with 40 ° tilt angle.
Reference: 524153
An original type BETA RR intake pipe, ideal for am6 center distance assemblies that require an angled intake pipe!
Reference: 269801
A pipe that will gain in performance while spending little.