Reference: 51305.05
Pipe right PARMAKIT Ø15 by 19mm SHA for MBK 51 / av10 motobecane
For performance and strong motor! Accompanied with a rigid SHA carburetor 15 to 16mm.
Banner
An inlet pipe MALOSSI angled as the origin for MBK 51 (engine av10), micro shot inside to avoid the rebounds of the gases it is of very good quality. Inner diameter 15mm and 19mm outside. Output size 22X22mm,
it will be accompanied by a racing carburetor and adapted racing valves. Slightly less efficient than the straight version because it is longer so the carburetor is less close to the engine.
Reference: 51305.05
For performance and strong motor! Accompanied with a rigid SHA carburetor 15 to 16mm.
Reference: 1408
At a good price and ideal to accompany a 14 to 16mm SHA carburetor on your MBK 51.
Reference: 1314916B
Ø32mm spare sleeve angled at 90 ° internal for MALOSSI admission kit on VESPA 80, 125, 200 ...
Reference: 02 6704
A pipe especially for MALOSSI G2 housing but few also be mounted on DERBI EURO 1, 2 and 3. It was created to mount your 24mm carburetors (RIGID PHBG or with flexible sleeve for passage).
Reference: 365952
A perfect pipe for mounting a carburetor in flexible mounting with a diameter of 17 to 21mm. It is very short and very well ventilated to have a good gain in power.
Reference: 02 6039B
A pipe created to match a 21 PHBG carburetor. This pipe is micro-blasted to prevent gas rebounds. Clearly it will mount a larger carburetor while gaining power.
Reference: 215.0242
Top model ideal for mounting a carburetor SHA 15 or 16mm on your MBK 51.
Reference: 1414
A pipe created for 17 to 19mm carburetors in flexible or rigid PHBG. The finish is not great but it will still be a very good base.
Reference: 215.0350
Ideal in case of breakage, wear your old pipe ... special admission for casings POLINI engines.
Reference: 516868
A perfect pipe to mount a carburettor in flexible assembly with a diameter of 17 to 21mm. It is very short and very well venturized to have a good power gain.
Reference: pack_pipe_malossi_AM6_DERBI_90°
MALOSSI pipe for adaptation on PEUGEOT 103 / MBK 51 requiring an angled admission! Center distance am6 / DERBI
Reference: 20 5123
Out of production.
Reference: 8542
Pipe for 15 or 16mm SHA carburetor.
Reference: 215.0245
High-end POLINI 15mm diameter valve box for MBK 51.
Reference: 215.0246
High-end 19mm diameter valve box POLINI for MBK 51.
Reference: 144.270.001
Flexible polini pipe 21mm for mini-moto and cross 2T POLINI, or mounting on POLINI crankcases with PEUGEOT 103 and MBK 51 supports!