Reference: 4066
CGN intake valve seal for MBK 51 / motobecane av10
Ideal for leak-free winding at a lower cost for a more reliable engine.
Banner
Ideal for mounting carburetors from 14 to 16mm in rigid SHA. Here is the TEKNIX pipe for angled MBK 51. It has an internal diameter of 16mm, and a diameter of 19mm at the fixing level. The finish is not top, but it is going very well, it will be a very good basis for engine preparations.
Aesthetic level it is also nice.
Please note that the packaging may vary depending on arrival. Sometimes it can be written CGN and other TEKNIX.
Reference: 4066
Ideal for leak-free winding at a lower cost for a more reliable engine.
Reference: 02 2962B
A fairly short pipe for maximum performance. It is mounted with a 15mm carburetor. In a very clear well studied and finished pipe for a good earning power of your engine.
Reference: 215.0242
Top model ideal for mounting a carburetor SHA 15 or 16mm on your MBK 51.
Reference: 02 6704
A pipe especially for MALOSSI G2 housing but few also be mounted on DERBI EURO 1, 2 and 3. It was created to mount your 24mm carburetors (RIGID PHBG or with flexible sleeve for passage).
Reference: 02 6572B
Pipe for flexible sleeve! A very good manufacturing quality.
Reference: 144.270.001
Flexible polini pipe 21mm for mini-moto and cross 2T POLINI, or mounting on POLINI crankcases with PEUGEOT 103 and MBK 51 supports!
Reference: 928.270.006
POLINI pipe for THOR engine or adaptation on PEUGEOT 103 / MBK 51 requiring an elbow admission!
Reference: 1414
A pipe created for 17 to 19mm carburetors in flexible or rigid PHBG. The finish is not great but it will still be a very good base.
Reference: 02 6039B
A pipe created to match a 21 PHBG carburetor. This pipe is micro-blasted to prevent gas rebounds. Clearly it will mount a larger carburetor while gaining power.
Reference: 02 6090B
A pipe of very good quality as usual at MALOSSI. This pipe is micro-blasted to prevent gas rebounds. It will agree very well with a 15mm carburetor.
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: 13800213
The intake pipe pack + valves G1 / G2 BIDALOT!
Reference: 1408
At a good price and ideal to accompany a 14 to 16mm SHA carburetor on your MBK 51.
Reference: pack_pipe_malossi_AM6_DERBI_90°
MALOSSI pipe for adaptation on PEUGEOT 103 / MBK 51 requiring an angled admission! Center distance am6 / DERBI
Reference: 159643
At a good price and ideal to accompany a 15 mm PHBG and SHA 14-15-16 carburettor on your MBK 51.
Reference: 8542
Pipe for 15 or 16mm SHA carburetor.
Reference: 1411
At a good price and ideal to accompany a 17.5 to 20 mm PHBG carburetor on your MBK 51.