Reference: 317.0005
Stud POLINI M6 X 32mm for exhaust, pipe admission ...
Set of 2 M6 studs that can be used for many applications.
Banner
The straight pipe Ø15mm PARMAKIT is provided for mounting a carburetor dellorto rigid SHA Ø15 to 16mm, this pipe is fitted on the original motor casings MBK 51 / av10 Motobecane. This intake pipe reduces the distance between the carburetor and the engine that amplifies the corresponding engine and performance.
Ideal for fans who want to PARMAKIT any room under that mark, apart from this, this model is not exceptional it strongly resembles the polini. We regret that it is not blasted internally to avoid the rebounds of gases, apart from that it is very solid and has a neat look / polished! Its output is 23.5 by 20.5mm.
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: 144.270.001
Flexible polini pipe 21mm for mini-moto and cross 2T POLINI, or mounting on POLINI crankcases with PEUGEOT 103 and MBK 51 supports!
Reference: 02 6039B
A pipe created to match a 21 PHBG carburetor. This pipe is micro-blasted to prevent gas rebounds. Clearly it will mount a larger carburetor while gaining power.
Reference: 13800213
The intake pipe pack + valves G1 / G2 BIDALOT!
Reference: 928.270.006
POLINI pipe for THOR engine or adaptation on PEUGEOT 103 / MBK 51 requiring an elbow admission!
Reference: 20 5123
Out of production.
Reference: 215.0246
High-end 19mm diameter valve box POLINI for MBK 51.
Reference: 516868
A perfect pipe to mount a carburettor in flexible assembly with a diameter of 17 to 21mm. It is very short and very well venturized to have a good power gain.
Reference: 215.0245
High-end POLINI 15mm diameter valve box for MBK 51.
Reference: CAL01RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on MOTOBECANE AV10 / MBK 51 engine with POLINI housings.
Reference: 1314916B
Ø32mm spare sleeve angled at 90 ° internal for MALOSSI admission kit on VESPA 80, 125, 200 ...
Reference: 02 6704
A pipe especially for MALOSSI G2 housing but few also be mounted on DERBI EURO 1, 2 and 3. It was created to mount your 24mm carburetors (RIGID PHBG or with flexible sleeve for passage).
Reference: 1415
A pipe with a correct finish that will go very well with a carburetor 14 to 16mm in SHA.
Reference: 02 5035B
The best to repair or modify the size of your MALOSSI valve boxes on your PEUGEOT 103 or MBK 51.
Reference: 02 2962B
A fairly short pipe for maximum performance. It is mounted with a 15mm carburetor. In a very clear well studied and finished pipe for a good earning power of your engine.
Reference: 159643
At a good price and ideal to accompany a 15 mm PHBG and SHA 14-15-16 carburettor on your MBK 51.