Reference: 215.0350
Special pipe casings POLINI Ø15 or 19mm for MBK 51 / av10 motobecane
Ideal in case of breakage, wear your old pipe ... special admission for casings POLINI engines.
Banner
The POLINI angled intake pipe is the best quality / performance / price ratio on the market. This intake pipe is designed to mount SHA carburetors 15 and 16mm, its mounting diameter is 19mm.
Of aesthetics it is very neat with its polini logo and its microbillage. Fixing level, provide a fixing stud because the high right screw does not pass, it is necessary to install the stud / nut system. It is well micro-beaded internally to prevent gas rebounds. The output is in 20 by 20mm.
Reference: 215.0350
Ideal in case of breakage, wear your old pipe ... special admission for casings POLINI engines.
Reference: 365952
A perfect pipe for mounting a carburetor in flexible mounting with a diameter of 17 to 21mm. It is very short and very well ventilated to have a good gain in power.
Reference: 516868
A perfect pipe to mount a carburettor in flexible assembly with a diameter of 17 to 21mm. It is very short and very well venturized to have a good power gain.
Reference: 02 2962B
A fairly short pipe for maximum performance. It is mounted with a 15mm carburetor. In a very clear well studied and finished pipe for a good earning power of your engine.
Reference: 1411
At a good price and ideal to accompany a 17.5 to 20 mm PHBG carburetor on your MBK 51.
Reference: 8542
Pipe for 15 or 16mm SHA carburetor.
Reference: 159643
At a good price and ideal to accompany a 15 mm PHBG and SHA 14-15-16 carburettor on your MBK 51.
Reference: 215.0245
High-end POLINI 15mm diameter valve box for MBK 51.
Reference: 13800213
The intake pipe pack + valves G1 / G2 BIDALOT!
Reference: 144.270.001
Flexible polini pipe 21mm for mini-moto and cross 2T POLINI, or mounting on POLINI crankcases with PEUGEOT 103 and MBK 51 supports!
Reference: 02 6704
A pipe especially for MALOSSI G2 housing but few also be mounted on DERBI EURO 1, 2 and 3. It was created to mount your 24mm carburetors (RIGID PHBG or with flexible sleeve for passage).
Reference: 02 6572B
Pipe for flexible sleeve! A very good manufacturing quality.
Reference: 20 5123
Out of production.
Reference: 02 6039B
A pipe created to match a 21 PHBG carburetor. This pipe is micro-blasted to prevent gas rebounds. Clearly it will mount a larger carburetor while gaining power.
Reference: 928.270.006
POLINI pipe for THOR engine or adaptation on PEUGEOT 103 / MBK 51 requiring an elbow admission!
Reference: 1408
At a good price and ideal to accompany a 14 to 16mm SHA carburetor on your MBK 51.