Reference: 1408
Straight pipe CGN Ø15 by 19mm SHA for MBK 51 / motobecane av10
At a good price and ideal to accompany a 14 to 16mm SHA carburetor on your MBK 51.
Banner
MALOSSI angled aluminum intake pipe for flexible mounting, this model has an anti-slip lip for the flexible sleeve, we recommend it with a PHBG preferably Ø19 to 21mm. This is the pipe used in the MALOSSI 15 pack for MBK 51. It is blasted internally to prevent gas rebounds. It was designed for MBK 51 with original casings, MALOSSI valves will be very well suited with this intake pipe.
On the aesthetic side, malossi is indicated on the side, for its assembly provide a stud, one of the 4 holes is rather badly placed and prevents the passage of a screw and it is therefore necessary to use the stud / nut technique.
Reference: 1408
At a good price and ideal to accompany a 14 to 16mm SHA carburetor on your MBK 51.
Reference: 02 5035B
The best to repair or modify the size of your MALOSSI valve boxes on your PEUGEOT 103 or MBK 51.
Reference: 215.0350
Ideal in case of breakage, wear your old pipe ... special admission for casings POLINI engines.
Reference: 02 6039B
A pipe created to match a 21 PHBG carburetor. This pipe is micro-blasted to prevent gas rebounds. Clearly it will mount a larger carburetor while gaining power.
Reference: 215.0246
High-end 19mm diameter valve box POLINI for MBK 51.
Reference: 1414
A pipe created for 17 to 19mm carburetors in flexible or rigid PHBG. The finish is not great but it will still be a very good base.
Reference: 365952
A perfect pipe for mounting a carburetor in flexible mounting with a diameter of 17 to 21mm. It is very short and very well ventilated to have a good gain in power.
Reference: CAL01RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on MOTOBECANE AV10 / MBK 51 engine with POLINI housings.
Reference: 02 6704
A pipe especially for MALOSSI G2 housing but few also be mounted on DERBI EURO 1, 2 and 3. It was created to mount your 24mm carburetors (RIGID PHBG or with flexible sleeve for passage).
Reference: 144.270.001
Flexible polini pipe 21mm for mini-moto and cross 2T POLINI, or mounting on POLINI crankcases with PEUGEOT 103 and MBK 51 supports!
Reference: 516868
A perfect pipe to mount a carburettor in flexible assembly with a diameter of 17 to 21mm. It is very short and very well venturized to have a good power gain.
Reference: 215.0245
High-end POLINI 15mm diameter valve box for MBK 51.
Reference: 928.270.006
POLINI pipe for THOR engine or adaptation on PEUGEOT 103 / MBK 51 requiring an elbow admission!
Reference: 02 6090B
A pipe of very good quality as usual at MALOSSI. This pipe is micro-blasted to prevent gas rebounds. It will agree very well with a 15mm carburetor.
Reference: 1415
A pipe with a correct finish that will go very well with a carburetor 14 to 16mm in SHA.
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.