Reference: 317.0005
Stud POLINI M6 X 32mm for exhaust, pipe admission ...
Set of 2 M6 studs that can be used for many applications.
Banner
MALOSSI angled aluminum intake pipe for flexible mounting, this model has an anti-slip lip for the flexible sleeve, we recommend it with a PHBG preferably Ø19 to 21mm. This is the pipe used in the MALOSSI 15 pack for MBK 51. It is blasted internally to prevent gas rebounds. It was designed for MBK 51 with original casings, MALOSSI valves will be very well suited with this intake pipe.
On the aesthetic side, malossi is indicated on the side, for its assembly provide a stud, one of the 4 holes is rather badly placed and prevents the passage of a screw and it is therefore necessary to use the stud / nut technique.
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: 20 5123
Out of production.
Reference: 1314916B
Ø32mm spare sleeve angled at 90 ° internal for MALOSSI admission kit on VESPA 80, 125, 200 ...
Reference: 02 6090B
A pipe of very good quality as usual at MALOSSI. This pipe is micro-blasted to prevent gas rebounds. It will agree very well with a 15mm carburetor.
Reference: CAL01RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on MOTOBECANE AV10 / MBK 51 engine with POLINI housings.
Reference: 13800213
The intake pipe pack + valves G1 / G2 BIDALOT!
Reference: 144.270.001
Flexible polini pipe 21mm for mini-moto and cross 2T POLINI, or mounting on POLINI crankcases with PEUGEOT 103 and MBK 51 supports!
Reference: 1415
A pipe with a correct finish that will go very well with a carburetor 14 to 16mm in SHA.
Reference: 02 6704
A pipe especially for MALOSSI G2 housing but few also be mounted on DERBI EURO 1, 2 and 3. It was created to mount your 24mm carburetors (RIGID PHBG or with flexible sleeve for passage).
Reference: 1408
At a good price and ideal to accompany a 14 to 16mm SHA carburetor on your MBK 51.
Reference: 1411
At a good price and ideal to accompany a 17.5 to 20 mm PHBG carburetor on your MBK 51.
Reference: 51305.05
For performance and strong motor! Accompanied with a rigid SHA carburetor 15 to 16mm.
Reference: 159643
At a good price and ideal to accompany a 15 mm PHBG and SHA 14-15-16 carburettor on your MBK 51.
Reference: 215.0246
High-end 19mm diameter valve box POLINI for MBK 51.
Reference: 215.0242
Top model ideal for mounting a carburetor SHA 15 or 16mm on your MBK 51.
Reference: 516868
A perfect pipe to mount a carburettor in flexible assembly with a diameter of 17 to 21mm. It is very short and very well venturized to have a good power gain.