Reference: 10871
REPLAY intake pipe 45° angle for PWK carburettor from 21 to 34mm on mécaboite engine DERBI euro 1/2/3
A very well finished pipe that will absorb vibrations and all this at a low price. For 24mm to 34mm PWK carburettors!
Banner
Here is a flexible intake pipe from TNT for mécaboite driving DERBI euro 1/2 and 3. Equipped with an outlet for separate lubrication, depression or even lung, you can also plug this outlet without any problem. Delivered as presented, its design is good, withstands vibrations very well, very short and the output is well diffused….
Being entirely in rubber, no need for a gasket because they are integrated into the pipe, it does not conduct heat in any way, avoids all gas rebounds, it is supplied with a steel support for optimized tightening any reinforcement! Excellent value. Finally, we recommend it in the company of a flexible carburetor (male) with a diameter of 17.5 / 19/20 or 21mm DELLORTO PHBG, PHB, PHBA or other models. This pipe has a Ø24mm fixing entry .
Reference: 10871
A very well finished pipe that will absorb vibrations and all this at a low price. For 24mm to 34mm PWK carburettors!
Reference: 487209
A good quality pipe with an almost perfect finish for a price more than affordable!
Reference: 23207.05
Carburetor 18 to 21mm flexible mounting, fixing d.19 X 24mm.
Reference: 9929240
Replacement for TPR orientable intake pipes with MIKUNI TM 24 and OKO 28 carburettor on mécaboite Minarelli AM6 and DERBI.
Reference: 494635
Optimize the performance of your mécaboite!
Reference: 1772
A very well finished pipe that will absorb vibrations and all this at a low price. In addition to this, you need to know more about it.
Reference: LC.44.35
One of the best price / quality ratio for carburetor 28 to 35mm. Reserved for connoisseurs!
Reference: 9930900
High-end TPR intake kit, 360 ° swiveling, flexible mounting specially designed to accompany a MIKUNI TM24 carburetor or carburetor of this size on AM6 & DERBI.
Reference: 215.0427
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: 2013800
The high-end and ultra-efficient Viton version!
Reference: 215.0428
Ideal for equipping a large, precise and efficient engine configuration! 360 ° swivel with 20 ° tilt angle.
Reference: CL02
A model of competition that you will greatly improve the performance of your DERBI.
Reference: 215.0463
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 467800
A good quality intake pipe which allows you to position your carburetor as you wish.
Reference: 215.0455
Ideal for equipping a large, precise and efficient engine configuration! 360° swivel with 20° tilt angle.