Banner
An original type intake pipe, good quality and less expensive than the original in concession.
Here is a flexible intake pipe from TNT for mécaboite driving DERBI euro 1/2 and 3. Equipped with an outlet for separate lubrication, depression or even lung, you can also plug this outlet without any problem. Delivered as presented, its design is good, withstands vibrations very well, very short and the output is well diffused….
Being entirely in rubber, no need for a gasket because they are integrated into the pipe, it does not conduct heat in any way, avoids all gas rebounds, it is supplied with a steel support for optimized tightening any reinforcement! Excellent value. Finally, we recommend it in the company of a flexible carburetor (male) with a diameter of 17.5 / 19/20 or 21mm DELLORTO PHBG, PHB, PHBA or other models. This pipe has a Ø24mm fixing entry .
Reference: 10871
A very well finished pipe that will absorb vibrations and all this at a low price. For 24mm to 34mm PWK carburettors!
Reference: 1772
A very well finished pipe that will absorb vibrations and all this at a low price. In addition to this, you need to know more about it.
Reference: 215.0417
Pipe 21mm POLINI high quality, ideal for laying a PHBG 19 or 21mm.
Reference: 9929240
Replacement for TPR orientable intake pipes with MIKUNI TM 24 and OKO 28 carburettor on mécaboite Minarelli AM6 and DERBI.
Reference: CL02
A model of competition that you will greatly improve the performance of your DERBI.
Reference: 25527
Pipe of admission with rigid and flexible venturi sleeve, excellent quality, good price!
Reference: 215.0427
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: LC.12.40
One of the best value for carburetor in 28 to 35mm. Reserved for connoisseurs!
Reference: 494635
Optimize the performance of your mécaboite!
Reference: 215.0455
Ideal for equipping a large, precise and efficient engine configuration! 360° swivel with 20° tilt angle.
Reference: 9931740
TPR intake kit, 360 ° swivel, flexible assembly specially designed to accompany an OKO, PWK POLINI, FURYTECH, KEIHIN ... 24 to 28mm carburetor on AM6 & DERBI Ø34mm mounting.
Reference: LC.44.35
One of the best price / quality ratio for carburetor 28 to 35mm. Reserved for connoisseurs!
Reference: 215.0440
Special intake pipe for POLINI carburettors CP 23 and 24mm on mécaboite DERBI. 360 ° rotatable with 30 ° inclination angle.
Reference: 02 6639B
An intake pipe designed for large carburetion This pipe is short for faster recovery.
Reference: 9930900
High-end TPR intake kit, 360 ° swiveling, flexible mounting specially designed to accompany a MIKUNI TM24 carburetor or carburetor of this size on AM6 & DERBI.
Reference: 23120.20
Complete intake kit and high-performance 30mm diameter for your mécaboite DERBI.
An original type intake pipe, good quality and less expensive than the original in concession.
