Banner
A very well finished pipe that will absorb vibrations and all this at a low price.
Here is a flexible intake pipe from TUN 'R for mécaboite driving DERBI euro 1/2 and 3. Equipped with an outlet for separate lubrication, depression or even lung, you can also plug this socket without any problem. 
Delivered as presented, its design is good, your vibrations are very good, very short and the outlet is well diffused… Being entirely made of rubber, no need for a joint because they are integrated into the pipe, it in no way conducts heat, avoids any gas rebounds and it is supplied with a steel support for optimized tightening while reinforcing! Excellent value. 
Finally, we recommend it in the company of a flexible carburetor (male) with a diameter of 17.5 / 19/20 or 21mm DELLORTO PHBG, PHB, PHBA or other models. This pipe has a Ø24 entry for fixing.
Reference: 215.0440
Special intake pipe for POLINI carburettors CP 23 and 24mm on mécaboite DERBI. 360 ° rotatable with 30 ° inclination angle.
Reference: 215.0455
Ideal for equipping a large, precise and efficient engine configuration! 360° swivel with 20° tilt angle.
Reference: 215.0439
Special intake pipe for POLINI CP 23 and 24mm carburetors. 360 ° swivel with 40 ° tilt angle.
Reference: 2013801
A very high-end special for large carburations on MINARELLI AM6, DERBI ...
Reference: 215.0427
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 2013800
The high-end and ultra-efficient Viton version!
Reference: 494635
Optimize the performance of your mécaboite!
Reference: 25527
Pipe of admission with rigid and flexible venturi sleeve, excellent quality, good price!
Reference: LC.12.40
One of the best value for carburetor in 28 to 35mm. Reserved for connoisseurs!
Reference: 215.0428
Ideal for equipping a large, precise and efficient engine configuration! 360 ° swivel with 20 ° tilt angle.
Reference: 140619
An original type intake pipe, good quality and less expensive than the original in concession.
Reference: 215.0462
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 215.0417
Pipe 21mm POLINI high quality, ideal for laying a PHBG 19 or 21mm.
Reference: 215.0463
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 487209
A good quality pipe with an almost perfect finish for a price more than affordable!
Reference: 10871
A very well finished pipe that will absorb vibrations and all this at a low price. For 24mm to 34mm PWK carburettors!
A very well finished pipe that will absorb vibrations and all this at a low price.
