Reference: 215.0439
POLINI Evolution adjustable intake pipe 23 to 24mm carburetor (Ø28,5mm fixing) mécaboite driving DERBI and AM6
Special intake pipe for POLINI CP 23 and 24mm carburetors. 360 ° swivel with 40 ° tilt angle.
Banner
Here is the TUN 'R adjustable intake pipe for mécaboite with DERBI euro 1, 2 & 3 engine. This intake pipe will allow you to position the carburetor in the direction you want! Ideal for large carburetion or to put the air filter of your choice. This pipe is obviously flexible in order to attenuate the vibrations and harmful jolts. No need to install an inlet pipe joint, the sleeve acts as this.
It is delivered to you with 2 sleeves, a large diameter for carburetors from 23 to 25mm and a small one for carburetors from 15 to 21mm. It has a non-slip lip and the rubber is very good! At such a price it is a product that we highly recommend. The pipe is delivered with the 2 carburetor clamps. Ideal for performance, the diffusion / ventripotency is excellent.
With the small sleeve: Carburetor mounting Ø23 to 25mm and internal diameter of 21mm (for DELLORTO PHBG, PHBN, and other models DE 19 to 21mm)
With the large sleeve: Carburetor mounting Ø32 to 35mm and internal diameter of Ø30mm (for DELLORTO PHBL, MIKUNI TM, VM, KEIHIN… and other models from 28 to 30mm)
Reference: 215.0439
Special intake pipe for POLINI CP 23 and 24mm carburetors. 360 ° swivel with 40 ° tilt angle.
Reference: 9929240
Replacement for TPR orientable intake pipes with MIKUNI TM 24 and OKO 28 carburettor on mécaboite Minarelli AM6 and DERBI.
Reference: 215.0455
Ideal for equipping a large, precise and efficient engine configuration! 360° swivel with 20° tilt angle.
Reference: 215.0463
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 10871
A very well finished pipe that will absorb vibrations and all this at a low price. For 24mm to 34mm PWK carburettors!
Reference: LC.12.40
One of the best value for carburetor in 28 to 35mm. Reserved for connoisseurs!
Reference: LC.44.35
One of the best price / quality ratio for carburetor 28 to 35mm. Reserved for connoisseurs!
Reference: 9930900
High-end TPR intake kit, 360 ° swiveling, flexible mounting specially designed to accompany a MIKUNI TM24 carburetor or carburetor of this size on AM6 & DERBI.
Reference: 23207.05
Carburetor 18 to 21mm flexible mounting, fixing d.19 X 24mm.
Reference: 02 6639B
An intake pipe designed for large carburetion This pipe is short for faster recovery.
Reference: 25527
Pipe of admission with rigid and flexible venturi sleeve, excellent quality, good price!
Reference: 215.0462
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: 140619
An original type intake pipe, good quality and less expensive than the original in concession.
Reference: 1772
A very well finished pipe that will absorb vibrations and all this at a low price. In addition to this, you need to know more about it.
Reference: 2013800
The high-end and ultra-efficient Viton version!