Reference: CL02
Kit flexible admission pipe Viton + valves MVT Ø19 / 21mm DERBI euro 1, 2 & 3
A model of competition that you will greatly improve the performance of your DERBI.
Banner
Here is the POLINI Evolution adjustable intake pipe for mécaboite engine DERBI euro 1, 2 & 3! This pipe is really on top, first of all you direct it as you wish to place the carburettor as you want! Its position is provided for very large carburettors and its internal diameter also (40mm, for carburettor from 30 to 34mm).
Its fixing diameter is from Ø38 to 42mm. To avoid harmful vibrations and jolts, the sleeve is made of specific viton. Stiff enough that the pipe won't crack or break when tightening. Even on the aesthetic side, we feel that POLINI has really taken care of this piece as desired. No need to put a seal, a seal is pre-integrated at the junction, moreover it is delivered with instructions, screws... Clearly, thanks to a perfect diffusion, an absorption of vibrations, a good position... The gain in performance will be present!
-For PWK 30 and 34mm carburettors.
-Carburettor fixing Ø38 to 42mm.
-Internal diameter 40mm.
-Angle of inclination 20°.
- 360° rotatable.
Have
A= Ø40mm
B= 30
C= 20°
Reference: CL02
A model of competition that you will greatly improve the performance of your DERBI.
Reference: 23120.20
Complete intake kit and high-performance 30mm diameter for your mécaboite DERBI.
Reference: 487209
A good quality pipe with an almost perfect finish for a price more than affordable!
Reference: 02 6639B
An intake pipe designed for large carburetion This pipe is short for faster recovery.
Reference: 467795
A very well finished pipe that will absorb vibrations and all this at a low price.
Reference: 2013801
A very high-end special for large carburations on MINARELLI AM6, DERBI ...
Reference: 494635
Optimize the performance of your mécaboite!
Reference: 215.0440
Special intake pipe for POLINI carburettors CP 23 and 24mm on mécaboite DERBI. 360 ° rotatable with 30 ° inclination angle.
Reference: 9929240
Replacement for TPR orientable intake pipes with MIKUNI TM 24 and OKO 28 carburettor on mécaboite Minarelli AM6 and DERBI.
Reference: LC.12.40
One of the best value for carburetor in 28 to 35mm. Reserved for connoisseurs!
Reference: 215.0417
Pipe 21mm POLINI high quality, ideal for laying a PHBG 19 or 21mm.
Reference: 9931740
TPR intake kit, 360 ° swivel, flexible assembly specially designed to accompany an OKO, PWK POLINI, FURYTECH, KEIHIN ... 24 to 28mm carburetor on AM6 & DERBI Ø34mm mounting.
Reference: 215.0427
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 215.0428
Ideal for equipping a large, precise and efficient engine configuration! 360 ° swivel with 20 ° tilt angle.
Reference: 1772
A very well finished pipe that will absorb vibrations and all this at a low price. In addition to this, you need to know more about it.
Reference: 25527
Pipe of admission with rigid and flexible venturi sleeve, excellent quality, good price!