Reference: 215.0439
POLINI Evolution adjustable intake pipe 23 to 24mm carburetor (Ø28,5mm fixing) mécaboite driving DERBI and AM6
Special intake pipe for POLINI CP 23 and 24mm carburetors. 360 ° swivel with 40 ° tilt angle.
Banner
The PARMAKIT intake kit for derbi is a model originally planned for 30mm carburetors. It is a flexible assembly and offers the possibility of separate greasing depression or if desired. The flexible sleeve is provided for carburetors in 36mm diameter mounting with anti-dérapement lip.
The valves are dipped 6 models in black fiber lamellae (glass) 0.30mm, we regret the absence of a diffuser, a good trainer will be able to made a tuned to the intake pipe. It comes with 2 sleeve clamps and gaskets 2 admission. There is also a red connector for carburetor, it go up on DELLORTO with mounting air filter thread 40mm, this connection allows you to switch to 45 or 37mm.
If you want to mount the slats of a specific thickness or carbon MALOSSI blades will install it without problems, POLINI also.
Reference: 215.0439
Special intake pipe for POLINI CP 23 and 24mm carburetors. 360 ° swivel with 40 ° tilt angle.
Reference: 10871
A very well finished pipe that will absorb vibrations and all this at a low price. For 24mm to 34mm PWK carburettors!
Reference: 215.0462
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 1772
A very well finished pipe that will absorb vibrations and all this at a low price. In addition to this, you need to know more about it.
Reference: 467800
A good quality intake pipe which allows you to position your carburetor as you wish.
Reference: 487209
A good quality pipe with an almost perfect finish for a price more than affordable!
Reference: 9930900
High-end TPR intake kit, 360 ° swiveling, flexible mounting specially designed to accompany a MIKUNI TM24 carburetor or carburetor of this size on AM6 & DERBI.
Reference: 467795
A very well finished pipe that will absorb vibrations and all this at a low price.
Reference: 2013800
The high-end and ultra-efficient Viton version!
Reference: 215.0463
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: CL02
A model of competition that you will greatly improve the performance of your DERBI.
Reference: LC.44.35
One of the best price / quality ratio for carburetor 28 to 35mm. Reserved for connoisseurs!
Reference: 215.0428
Ideal for equipping a large, precise and efficient engine configuration! 360 ° swivel with 20 ° tilt angle.
Reference: 02 6639B
An intake pipe designed for large carburetion This pipe is short for faster recovery.
Reference: 215.0427
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.