Reference: 02 6639B
Flexible MALOSSI pipe Ø28 by 46mm for MALOSSI MG, Minarelli am6 and DERBI euro1,2 & 3
An intake pipe designed for large carburetion This pipe is short for faster recovery.
Banner
Here is the P2R orientable intake pipe with 2 sleeves available (angle of 30 ° c and angle of 45 ° c) for mécaboite driving DERBI euro 1, 2 & 3. This intake pipe will therefore allow you to position the carburetor in the direction and angle you want! Ideal for carburettors from 17.5 to 21mm or to put the air filter of your choice. This pipe is obviously flexible with an aluminum base in order to attenuate vibrations and harmful jolts. No need to install an inlet pipe seal, the sleeve acts as it.
It has an anti-slip lip and the rubber is of very good quality! At such a price it is a product that we highly recommend. The pipe is delivered with the 2 carburetor clamps. Ideal for performance, diffusion / ventripotence is excellent.
Contains:
-1 sleeve with angle of 30 ° fixing diameter of 24mm
-1 sleeve with angle of 45 ° fixing diameter of 24mm
Reference: 02 6639B
An intake pipe designed for large carburetion This pipe is short for faster recovery.
Reference: 467795
A very well finished pipe that will absorb vibrations and all this at a low price.
Reference: 25527
Pipe of admission with rigid and flexible venturi sleeve, excellent quality, good price!
Reference: 215.0417
Pipe 21mm POLINI high quality, ideal for laying a PHBG 19 or 21mm.
Reference: 215.0440
Special intake pipe for POLINI carburettors CP 23 and 24mm on mécaboite DERBI. 360 ° rotatable with 30 ° inclination angle.
Reference: 215.0439
Special intake pipe for POLINI CP 23 and 24mm carburetors. 360 ° swivel with 40 ° tilt angle.
Reference: 215.0428
Ideal for equipping a large, precise and efficient engine configuration! 360 ° swivel with 20 ° tilt angle.
Reference: 10871
A very well finished pipe that will absorb vibrations and all this at a low price. For 24mm to 34mm PWK carburettors!
Reference: 9931740
TPR intake kit, 360 ° swivel, flexible assembly specially designed to accompany an OKO, PWK POLINI, FURYTECH, KEIHIN ... 24 to 28mm carburetor on AM6 & DERBI Ø34mm mounting.
Reference: 215.0455
Ideal for equipping a large, precise and efficient engine configuration! 360° swivel with 20° tilt angle.
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: LC.44.35
One of the best price / quality ratio for carburetor 28 to 35mm. Reserved for connoisseurs!
Reference: 9930900
High-end TPR intake kit, 360 ° swiveling, flexible mounting specially designed to accompany a MIKUNI TM24 carburetor or carburetor of this size on AM6 & DERBI.
Reference: 2013801
A very high-end special for large carburations on MINARELLI AM6, DERBI ...
Reference: 467800
A good quality intake pipe which allows you to position your carburetor as you wish.
Reference: CL02
A model of competition that you will greatly improve the performance of your DERBI.