Reference: 156190
kit 2 sheets 21 X 29.7cm, joint board for car, mécaboite, scooter, mob, ... to be cut
A standard 0.50mm joint board + BA55 0.5mm cardboard joint
Banner
Tube containing 114 grams of paste for additions of materials or repair, refilling on aluminum, steels .... Very high quality product LOCTITE brand! This dough has the best features of the entire market and is well worth its higher prices than other products.
Hand kneading (with gloves), once very hot and kneaded this dough will be enough mole, enough "liquid" to make the additions you want without sinking. It resists to 120 ° C real, it takes 10 minutes and dry in 1 hour, ideal for additions of materials during a good engine preparation, once dry it is indestructible, you can grind it with the dremel to give the desired shape!
Loctite 3463 metal-filled resins, two-component epoxy, moldable paste
Taken in 10 minutes. Modelable stick loaded steel. Adheres to wet surfaces and cures under water. Resistant to chemicals and corrosion. Can be drilled, sanded and painted.
Technical data :
Grey color
Life time: 3 min
Setting time: 10 min
Operating temperature range: -30 to + 120 ° C
Shear tensile strength N / mm²: 6.8N / mm²
Peel strength N / mm: <1 N / mm
Volume mixing ratio: N / A
Packaging:
Blister - Tube 50 g
114 g tube
Reference: 156190
A standard 0.50mm joint board + BA55 0.5mm cardboard joint
Reference: 3450
A very well studied paste for filling or repairing your steel parts.
Reference: M813002000001
Paste with elastic joint and resistant to high temperatures. (300 ° C)
Reference: VKM00040
Artein cutting joint sheets
Reference: 1379570
Fast setting adhesive gel form, high resistance to adding material, filler metals / some plastics, rubber, wood, paper, leather ....
Reference: SI 5660
A top-of-the-range joint compound for maximum strength and tightness. This paste resists from -55 ° to 250 ° C without problem.
Reference: 152111
Ideal for creating your own engine gasket, carburetor and many other uses.
Reference: 5910
A top-of-the-range joint compound for maximum resistance and tightness. This paste resists from -55 ° to 250 ° C without problem.
Reference: 440922
A very good quality product, ideal for cutting your own joint.
Reference: 279134_cgn
A good quality paste that resists up to 180 ° C with a maximum drying time after 24 hours.
Reference: 2374
A low viscosity paste which will allow you a perfect sealing of your engine. This paw is often used by professionals.
Reference: 5926
A high-end sealant for maximum resistance and sealing from -60° to + 250°.
Reference: 156189
Two standard joint boards in 0.25 and 0.50mm + BA55 0.3mm cardboard joint + steel reinforced joint in 1mm
Reference: 440924
Cutting sheets to cut yourself ARTEIN 0.8 and 1.2 mm, ideal for the manufacture of cylinder head or exhaust!
Reference: P300000999002
Paste with elastic joint and resistant to high temperatures. (300 ° C). In a set of 12 tubes!