- There are no more items in your cart
- Shipping Free
- Total €0.00
The CAF 1 joint paste from the BLUESTAR Silicones brand is a high thermal resistance adhesive joint lug, it is widely used in the world of cars, motorcycles, mopeds and many other areas it is very good quality and will be suitable for many applications, it is differentiated by a red color, here are these properties:
Flexible adhesive with high thermal resistance and high
adhesion for assembly and sealing
Description CAF 1 is a one-component silicone elastomer
crosslinking at room temperature :
Acetic.
Variable rheology, from self-leveling to fluid, ranging from CAF 1 to CAF 1 Extra Fluid.
Red.
Applications CAF 1 is mainly used in the fields of
sealing and bonding when applications require low viscosity
CAF 1 is used in particular for :
- Engine sealing in automotive after-sales service (CAF 1).
-General maintenance in aeronautics (CAF 1).
Advantages CAF 1 has a fast crosslinking speed and a very
good resistance to high temperatures.
The CAF 1 thus makes it possible to guarantee a perfect assembly and
complete sealing when grouting different materials subjected to thermal stresses.
CAF 1 also exhibits great resistance to chemical agents.
Characteristics 1 - Processing / Crosslinking
1.1 Implementation :
The implementation is particularly easy, because the products are delivered ready for use.
Application can be done manually or using robotic dispensing equipment.
The CAF 1 is placed on one of the two joint planes.
Assembly must be carried out before the product has formed a skin.
It is recommended to apply CAF 1 on clean surfaces
and dry.
1.2 Crosslinking :
The crosslinking of CAF 1 begins as soon as the product is in contact
with atmospheric humidity.
Skin formation time *, min, approx ... .................................... 7
Time required to crosslink 2 mm *, hours, approx ................... 6
Cured thickness after 24 h *, mm, approx .................................. 4.3
Reference: 152110
kit of 4 sheets 20 X 15cm, multi-thickness 150°C paper joint board for cars, mécaboites, scooters, mobs, etc. to be cut
Kit of four 150°C paper seal sheets, different thicknesses included.
Reference: M813002000001
ATHENA Athesil RTV Silicone Sealant Joint Paste 80 ml
Paste with elastic joint and resistant to high temperatures. (300 ° C)
Reference: 440922
ARTEIN pressed cardboard joint sheets 2 thicknesses (0.50 / 0.75mm)
A very good quality product, ideal for cutting your own joint.
Reference: 152111
Sheet, P2R joint board for car, motorcycle, scooter, mob, ... type and thickness of your choice, to be cut
Ideal for creating your own engine gasket, carburetor and many other uses.
Reference: 5910
LOCTITE Silicone Black Joint Paste 40ml
A top-of-the-range joint compound for maximum resistance and tightness. This paste resists from -55 ° to 250 ° C without problem.
Reference: 171800
Paste assembly muffler PRESTO 170 grams
Ideal for safe and leak-free mounting of your exhaust.
Reference: 3463
Paste for adding material and filling aluminum (two-component epoxy) LOCTITE METAL MAGIC STEEL 3463 114g
A material addition paste used by our team for great preparation. The quality is present. Practicality too!
Reference: 036.164
Joint paste ELRING DIRKO gray 70ml
Elastic joint paste resistant to high temperatures. (300 ° C)
Reference: 3479
Paste for adding material, patching two-component epoxy aluminum loaded high temperature Loctite 3479 A + B 500gr
Large quantity of 500 grams. A professional product, high quality sticks very well, it is flexible and takes well to heat.
Reference: 440924
ARTEIN flat reinforced joint sheets 2 layers (0.80 / 1.2mm)
Cutting sheets to cut yourself ARTEIN 0.8 and 1.2 mm, ideal for the manufacture of cylinder head or exhaust!
Reference: 5926
LOCTITE 5926 blue silicone sealant 100ml
A high-end sealant for maximum resistance and sealing from -60° to + 250°.
Reference: 492203
Two component adhesive LOCTITE plastic repair 9225SF, bumper, fairings, bodywork ... 50ml
A professional product, high quality, designed to repair any type of plastic body such as bumper, motorcycle fairing, scooter, ....
Reference: 156189
kit 4 sheets 21 X 29.7cm, joint board for car, mécaboite, scooter, mob, ... to be cut
Two standard joint boards in 0.25 and 0.50mm + BA55 0.3mm cardboard joint + steel reinforced joint in 1mm
Reference: 168917
BLUESTAR Silicones CAF 4 white joint paste 100 grams
A top-of-the-range, quick-setting sealant for maximum resistance and tightness.
Reference: 1379570
Paste for adding material and filler metals (epoxy Bi-components) LOCTITE adhesive / 10g lijm 3090
Fast setting adhesive gel form, high resistance to adding material, filler metals / some plastics, rubber, wood, paper, leather ....