Reference: 148605
Oil filler cap VOCA for gearbox minarelli am6 black or red
Quality piece, ideal in case of breakage or wear of your old original cap on AM6 engine.
Banner
Gearbox pinion on secondary shaft, original type reinforced TOP PERFORMANCES. This pinion is that of the second report, it will be of use to you in case of breakage of your second gear, always remember to check all the pinion gear during a breakage in order to buy the right sprockets.
Reference: 148605
Quality piece, ideal in case of breakage or wear of your old original cap on AM6 engine.
Reference: 504842
A box of complete circlips which will allow you to make all your repairs, changes. Clips for pinion, gearbox, toe-clip, variator, ...
Reference: 32173
A good quality piece! Ideal for refurbishing your gearbox.
Reference: 32170
Original type balance shaft and less expensive than in concession.
Reference: AM00009
A high quality pinion, ideal for changing your 6th gear on the primary shaft.
Reference: 146908
Ideal for the refurbishment of your gearbox minarelli am6. Allows the mounting of the rolling box drum!
Reference: 753292
Original spring essential for the proper functioning of your gearbox!
Reference: AP8206245
Spare parts essential for the passage of an intake kit with large carburettor DERBI.
Reference: 32188
Ideal for the refurbishment of your starting part on mécaboite driving MINARELLI AM6.
Reference: AM00026
High quality replacement part TOP PERFORMANCES, essential to have the signal on the position of the neutral position on your mécaboite driving minarelli am6.
Reference: AM00012
A high quality pinion, ideal for changing your third gear ratio on the secondary shaft.
Reference: AM00006
A high quality gear, ideal for changing your second report on the input shaft.
Reference: AM00013
A high quality gear, ideal for changing your 4th gear on the output shaft.
Reference: 32184
An element of very good quality, ideal for the refurbishment of your oil pump system.
Reference: AM00007
A special gear of high quality, ideal for changing your 3rd & 4th gear on the input shaft.
Reference: 485296
Ideal in case of breakage or wear of your old circlip.