Reference: 32187
Original type P2R kick rock for MINARELLI am6 engine
Indispensable for the proper functioning of your kick starter mechanism.
Banner
Here is the assortment of 300 TNT circlips for all your repairs, mechanical sessions. An essential box in any workshop to always have these small parts difficult to find and fragile after several disassembly, reassembly. Ideal for scooter, motorbike, mob, car ... Very practical storage box, clips classified by size.
Inch and mm sizes available in this kit:
Namely that an inch measures 25.4mm.
-X20 1/8 "= 3.175mm
-X25 1/4 "= 6.35mm
-X15 13/16 "= 20.63mm
-X15 1-1 / 16 "= 29.58 mm
-X15 7/16 "= 11.11mm
-X15 9/16 "= 14.28mm
-X10 5/32 "= 3.96mm
-X15 5/16 "= 7.93mm
-X20 7/8 "= 22.22mm
-X10 1-1 / 8 "= 28.57 mm
-X15 15/32 "= 11.90mm
-X20 5/8 "= 15.87mm
-X15 3/16 "= 4.76mm
-X20 3/8 "= 9.52mm
-X15 1 "= 25.40mm
-X5 1-1 / 4 "= 31.75mm
-X25 1/2 "= 12.70mm
-X25 3/4 "= 19.05mm
Reference: 32187
Indispensable for the proper functioning of your kick starter mechanism.
Reference: 240499
Locking washer for clutch plate on MINARELLI AM6 engine.
Reference: 32171
A high quality gear, ideal for start fresh on your engine.
Reference: 519357
Original type element for minarelli am6 engine.
Reference: 32186
A pinion original type of kick axis and cheaper than in concession. Ideal for refurbishment of your engine down!
Reference: AM00026
High quality replacement part TOP PERFORMANCES, essential to have the signal on the position of the neutral position on your mécaboite driving minarelli am6.
Reference: 148605
Quality piece, ideal in case of breakage or wear of your old original cap on AM6 engine.
Reference: 504841
A box of complete circlips that will allow you to make all your repairs, changes.
Reference: 485296
Ideal in case of breakage or wear of your old circlip.
Reference: AM00008
A high quality gear, ideal to change your 5th gear on the input shaft.
Reference: 32185
Here is the original type full kick axle from P2R. Indispensable element, ideal in case of breakage or wear of your old part. Very good quality at an attractive price, mounts on mécaboite minarelli am6.
Reference: AP8206281
Ideal for the refurbishment of your minarelli am6 gearbox.
Reference: AM00002
A secondary gearbox shaft reinforced, ideal for repairing your motor box 50 AM6.
Reference: AM00015
A high quality gear, ideal to change your 6th gear on the output shaft.
Reference: 9935030
Ideal for refurbishing your gearbox.
Reference: AM00013
A high quality gear, ideal for changing your 4th gear on the output shaft.