Reference: 53129_00
40mm 120 ° angled tube kit for DELLORTO carburettor
Ideal in case of loss or to pass your cable as desired.
Banner
In order to refurbish your PHBG DELLORTO carburettor. The complete gasket set for normal PHBG carburetor and racing black edition.
The pack contains :
X1 tank cap seal Ø1.2cm
X1 aluminum threaded cover gasket
X1 cover gasket has 2 screws
X1 tank seal
X1 O-ring for wealth screw
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.
Reference: 30 3339
A quality transparent tank with plug for PHBG and PHBD carburettor.
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.
Reference: 53016_00 / B53016B
Kit of complete collar for rigid carburettor PHBG and SHBC!
Reference: 26 4189
Ideal for lost or modify the passage of your cable.
Reference: 09538_00
Ideal to pass your choke cable pull or to repair your PHBG!
Reference: 1297
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Reference: 09779_00
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.
Reference: 129514
For a refurbishment at a lower cost for a perfect seal.
Reference: 4477.62
The ring which seals and tightens your intake pipes with your RIGID PHBG!
Reference: 53036_00
Ideal in case of loss or change the passage of your cable.
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 493928
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!