Reference: 213458
O-ring screw richness DELLORTO carburettor PHBG, PHBE, PHBH, PHBL, VHST ...
A necessary part for the proper functioning of your carburetor.
Banner
Needle for carburetor DELLORTO SHA, PHBG and PHBG Racing Edition (Black and Red), allows the opening and closing of the arrival of gasoline in the tank. When there is a fuel leak problem, it often comes from the tightness of the needle closure or the float and its axis. Delivered as presented individually, the price therefore concerns only one needle.
Reference: 213458
A necessary part for the proper functioning of your carburetor.
Reference: 1298
The little room in which hangs the starter cable.
Reference: 473464
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 4477.62
The ring which seals and tightens your intake pipes with your RIGID PHBG!
Reference: 1285
Ideal in case of leakage for a good quality repair at low price.
Reference: 53031.78
The spare cover with screws for your DELLORTO PHBG carburettors except Racing Red and Black Edition.
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: 2707
The idle screw without its spring for your PHBG!
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 203.1504
A machined / blue anodized part POLINI for your PHBG carburettors!
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
Reference: 506272
Excellent in the event of a problem or leak from your carburetor.
Reference: 11540
Excellent in the event of a problem or a leak in your carburetor.