Reference: 121692
Locking nut (against nut) for DELLORTO cable tensioning screw
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Banner
A fuel leak is often synonymous with a dead float or a worn needle. The float when it fills with gasoline no longer closes the inlet and the carburetor starts to leak, so it is important to maintain the carburetor and change the float if necessary. This float is the standard 4 gram model.
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 52526_77
Ideal for refurbishing your standard PHBG or racing black edition.
Reference: 203.1504
A machined / blue anodized part POLINI for your PHBG carburettors!
Reference: 11540
Excellent in the event of a problem or a leak in your carburetor.
Reference: 05 3733B
Ideal to increase the venturi effect so your performance.
Reference: 53036_00
Ideal in case of loss or change the passage of your cable.
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 4477.62
The ring which seals and tightens your intake pipes with your RIGID PHBG!
Reference: 53031.78
The spare cover with screws for your DELLORTO PHBG carburettors except Racing Red and Black Edition.
Reference: 1285
Ideal in case of leakage for a good quality repair at low price.
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
Reference: 18951-53
The replacement cover for your DELLORTO PHBG carburettors, to screw.
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...